Specifications

1-5
Wind Box Series
Rear View
11
3
4
5
7
8
6
9
10
2
1
3
3
1
Card Reader Drive
The built-in card reader may support various types of memory cards.
2
Power Button/ LED
Press the power button to turn the system on and o. The power LED glows
when the system is turned on and goes o when the system is shut down.
In terms of power saving, the LED blinks in S3 (Suspend to RAM) mode and
goes o in S4 (Suspend to Disk) mode. Pressing the system power button
will wake the system up from power saving mode.
3
Ventilator
The ventilator on the enclosure is used for air convection and to prevent the
equipment from overheating. Do not cover the ventilator.
4
VGA-Out Port
The DB15-pin female connector is provided for monitor.

4
USB 2.0 Port
The USB (Universal Serial Bus) port is for attaching USB devices such
as keyboard, mouse, or other USB-compatible devices. It supports up to
480Mbit/s (Hi-Speed) data transfer rate.
5
Headphone Jack
This is a connector for headphones.
6
Microphone Jack
This is a connector for microphones.
7
WLAN LED
This indicator glows green when WLAN function is enabled and glows blue
when WiMax function is enabled. The indicator goes out when this function
is disabled.
8
HDD LED
This indicator shows the activity status of the HDD. It ashes when the
system is accessing data on the HDD and remains o when no disk activity
is detected.
9
Stand
Use this stand to position your system on a at and stable surface. Another
way to position your system without stand is to lay your system horizontally
on the surface with the Power Button faces up to the top.