DIGIVOX mini Hybrid User Manual
Copyright and Trademark Notice ©2007 by MSI. All rights reserved. Information in this document is subject to change without notice. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical without prior written permission of MSI. MSI makes no representation or warranties with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose.
COPYRIGHT NOTICES The material in this document is the intellectual property of MICRO-STAR INTERNATIONAL. We take every care in the preparation of this document, but no guarantee is given as to the correctness of its contents. Our products are under continual improvement and we reserve the right to make changes without notice. TRADEMARKS All trademarks are the properties of their respective owners. MICRO-STAR INTERNATIONAL Statement All contents are subject to change without notice.
WUDMDQMD NRML LPDMX 06, R]QDNX L NRML VX SURGDWL X (8 2YH SURL]YRGH PRåHWH YUDWLWL QD lokalnim mestima za prikupljanje.
Ɋɭɫɫɤɢɣ: Ʉɨɦɩɚɧɢɹ MSI ɩɪɟɞɩɪɢɧɢɦɚɟɬ ɚɤɬɢɜɧɵɟ ɞɟɣɫɬɜɢɹ ɩɨ ɡɚɳɢɬɟ ɨɤɪɭɠɚɸɳɟɣ ɫɪɟɞɵ, ɩɨɷɬɨɦɭ ɧɚɩɨɦɢɧɚɟɦ ɜɚɦ, ɱɬɨ....
DIGIVOX mini Hybrid TotalMedia Interface Overview 3.2 Main Menu 3.3 TV Scanning nd 3.4 2 Tuner signal scanning 3.5 Total Media Interface Instruction 3.6 DVD Management 3.7 Pictur Management 3.8 Music Management 3.9 Radio Management 3.10 Video Management 3.11 Setting 13 14 15 18 19 20 20 21 22 4. Medio Converter 28 5. Remote Control 30 4.1 File Comvert 4.
Getting Started 1. Getting Started 1.1 Introduction Thank you for choosing the DIGIVOX mini Hybrid TV tuner and video capture unit. This product turns your PC into a powerful desktop multimedia system quickly and easily. Capture video and still images and experience real-time MPEG-2 recording. The DIGIVOX mini Hybrid provides you with a high quality TV viewing experience with true stereo sound! 1.
Getting Started 1.4 System Requirements To successfully use the DIGIVOX mini Hybrid solution, please ensure that your system meets the following requirements: Pentium® 4 or AMD Athlon 2.0 GHz or faster, 2.4GHz or faster recommended 512 MB RAM (minimum),1G RAM recommended One available USB 2.0 port AC97 compatible sound card 2GB free HD space CD-ROM drive (for driver/software installation) DirectX 9.0c or higher installed Graphics card/chipset with full support for DirectX 9.
Installation 2. Installation The following sections provide step-by-step instructions installing and configuring The following sections provide step-by-step instructions onon installing and configuring card, accessories software. t the ard, accessories andand software . Before installing your DigiX mini II mini A/D III0, insert the installation and an CD and Before installing your DIGIVOX Hybrid , please insert the CD installation installati n menu should load aut m ti lly.
Installation 2.2 Connecting the DIGIVOX mini Hybrid Connect the RF dongle to the connection port on the DIGIVOX mini Hybrid connect your digital antenna to the RF dongle. Now plug the DIGIVOX mini Hybrid unit into an open USB 2.0 port on your PC.
Installation 2.3 Driver Installation From the installation menu, please click on Driver Installation to install DIGIVOX mini Hybrid . driver. Follow the prompts to complete installation of the driver. 2.4 Installation of the TV application Install the TV software by clicking “Arcsoft Total Media”. Just follow the prompts to install the software 2.5 Installation of Media Converter Click on Media Converter to install the software. Just follow the prompts to complete installation .
Installation 2.6 Setup of Media Center (MCE 2005) Double-click the My TV icon on your desktop to start Media Center. 6 Click on Settings. Now click on TV. Click on Set Up TV Signal. A warning message will appear. Click Yes. Click Next. Select Yes, use this region to configure TV services if your current region is displayed. If not, select No, I want to select a different region. Click Next.
Installation If you chose to select your region, select your region from the list and click Next. Click the circle next to Set Up Guide Settings and click Next. Click on Next. If you want to use the Media Center Guide, select Yes and follow the onscreen prompts. If not, select No. Click Next. Click Start Scan to begin a channel scan. Windows MCE will now scan for available channels in your area. This may take a few minutes.
Installation When the scan is finished, click Next To watch TV, click on My TV from the main menu. Click on Live TV and you can now start watching TV! For more details on how to use Media Center, consult your Windows MCE user manual or online help. ! ! 8 In order to use the DIGIVOX A/D III with MCE 2005, you must install an MCE Certified MPEG-2 decoder (also known as a DVD decoder) in order to watch and record TV in Windows MCE. This DVD decoder is not included on the installation CD.
Installation 2.7 Setup Media Center (Vista Premium Users) 1. Click on the Media Center icon 2. From the welcome screen, select from the Start Menu or the QuickStart bar. Custom setup and click OK. 3. Click Next and follow the onscreen instructions to set up Media Center. 4. When you reach the Optional Setup screen, select Configure tuner, TV signal, and Guide and click Next. 5. If you are in the currently displayed 6. Here, select your TV signal region, select Yes, use this region to source.
Installation 7. Here, choose Digial Terrestrial and click Next . 8. Click Start Scan and let the channel scan finish, then click Next after it finishes. 9. Here, select Yes if you want to use Media Center’s Guide feature, or No if not. Click Next. 10. This completes setup of your TV card with Media Center. You can continue to set up the rest of the options, or you can select I am finished and Next to finish setup. .
Total Media __________________________________________________________ 3.Total Media 3.1 Total Media Interface Overview 1 2 3 4 5 6 7 8 10 9 11 23 13 12 15 14 17 16 19 18 20 21 22 1. Full Screen 2. EPG 12. Forward 13. Skip to beginning 3. Channels 4. Recorded TV 5. Schedule 6. Capture Frame 7. Teletext 8. Settings 9. Playback 10. Stop 11. Backward 14. Skip to end 15. Volume Bar 16. Volume Down 17. Volume Up 18. Channel Down 19. Channel Up 20. My Favorite 21. Aspect Ratio 22. MTS 23.
Total Media __________________________________________________________ 3.2 Main Menu Total Media is a Media Center Like software. You can not only watch Digital TV but a Picture and Video Management tool. The below software instruction will guide you to learn the magic of Total Media 3.5 3.2-1 Choose Region 3.
Total Media __________________________________________________________ 3.3 TV Scanning Analog TV 3.3-1 Select Audio Device Choose “Audio Pin Source” 3.3-2 Choose “CableTV”or “AntennaTV” for Analog TV signal scanning 3.
Total Media __________________________________________________________ 3.4 2 nd Tuner signal scanning nd 3.4-1 Choose “Yes”for 2 tuner scanning nd For 2 tuner scanning, you can directly click “Yes” to scan another type of TV signal. If you don’t want to scan out the channel this time, you may set up the signal next time. 3.4-2 Click “Start” to scan Total Media channels. All scanned channels will be shown on channel list. When scan is completed,click “Next” to the next step. 3.
Total Media __________________________________________________________ 3.5 Total Media Interface Instruction 3.5-1 Full Screen Click “ Full Screen” to enlarge TV on full monitor 3.5-2 EPG Information On EPG information page, you can check TV program name list on Total Media channels for next few days 3.
Total Media __________________________________________________________ 3.5-4 Recorded TV All recorded TV will be saved on your hard drive, and you can directly watch all recorded TV from “Recorded TV” option. You can also run “Video Setting” from this page. (Please refer to 3.6 for “Video Setting” Information) 3.5-5 Schedule When click “Schedule”, the schedule recording list will be shown. You can choose “Add” to set new recording schedule. 3.5-5.
Total Media __________________________________________________________ 3.5-6 Teletext Teletext service is only supported on specific region. “Teletext” option can only be enable when the region provide teletext service. 3.5-7 Setting On “setting” option, you can Reset TV Signal / Edit Channel / TV settings / Import or Export Channel list. 3.
Total Media __________________________________________________________ 3.6 DVD Management 3.6-1 Total Media DVD/VCD play is an easy operating DVD/VCD playback system. You can not only play DVD or VCD movie but also capture frame from the playing DVD by only a simple click. 3.6-2 If you do not insert any DVD or VCD disc on your DVD-ROM or CD-ROM drive.
Total Media __________________________________________________________ 3.7 Picture Management 3.7-1 Please select your picture folder. Click “Play” to play slide show. For slide show setting, 3.
Total Media __________________________________________________________ 3.8 Music Management 3.8-1 Please add your favorite music to “My Playlists”. You can listen to music by playing songs from “My Playlists”. You may also use “Rip Music CD” and “Burn to Disc” to create your music CD 3.9 Radio Management 3.9-1 Please add your favorite radio or auto scan to listen it. you also can record radio audio to your PC or notebook.
Total Media __________________________________________________________ 3.10 Video Management 3.10-1 Video Information To preview, rename or edit a video file, begin by selecting the video. If the file is not in the current directory, use the navigation control at the top of the screen to go to the folder containing the file. 3.10-2 Capture If capture device is connected, you can capture video clips from your DV / Camcorder / VCR 3.10-3 Video Setting Please refer to 3.9.
Total Media __________________________________________________________ 3.11 Setting 3.11-1 General Setting From General Setting, you can set up the “Printer” / “Frame Storage” and “Video location / Recording Display Storage” setting on hardware acceleration and 3D effect. On “About TotalMedia”, you can see the TM version. For online registration and version update, you can upgrade the TM to latest version by one button clicking.
Total Media __________________________________________________________ 3.11-2 TV Setting 3.11-2.1 Choose the TV Signal 3.11-2.2 Choose the TV Signal 3.11-2.
Total Media __________________________________________________________ 3.11-3 Analog TV Scanning 3.11-3.1 Select Audio Device Choose “Audio Pin Source” 3.11-3.2 Choose “CableTV”or “AntennaTV” for Analog TV signal scanning 3.11-3.
Total Media __________________________________________________________ nd 3.11-4 2 Tuner signal scanning nd 3.11-4.1 Choose “Yes”for 2 tuner scanning nd For 2 tuner scanning, you can directly click “Yes” to scan another type of TV signal. If you don’t want to scan out the channel this time, you may set up the signal next time. 3.11-4.2 Scan Channel Click “Start” to rescan DVB-T channels. When the scan is completed, click “Next” to finish the channel rescan. 3.11-4.
Total Media __________________________________________________________ 3.11-4.4 TV Settings In some regions, Subtitle service is provided by broadcaster. Right click “Subtitle” to support subtitling. 3.11-4.5 Import Channel List If you would like to import any Channel list, just choose the correct route and click “Import” to import new channel list. 3.11-4.
Total Media __________________________________________________________ 3.11-5 Video Setting 3.11-5.1 Video Setting On regions supporting Subtitle service, you can enable “Subtitle” option for recorded TV program. (Note: For not support subtitle service region, Subtitle will not be able to enabled) 3.11-5.2 Capture Setting If capture device is detected, you can find the device information and adjust the setting from “Capture Setting” option. 3.
4 Media Converter Introduction 4.1 File Convert Launch “Arcsoft Media Converter” for file format convert Select “Add File” to add the file you would like to do the format transfer. You can set up the file format from left hand side Select the folder you would like to save the file Click “Start” to complete file convert. Note: the convertion 4.2 “You Tube” Setting Media Converter can direct transfer your file into “You Tube” format and automatically upload to “You Tube” website. 4.2.
4.2.2 Get Authorization After setting your account, please click “Get Authorization”. Media Converter will guide you to “You Tube” website. Please press “Allow” to continue the setting. 4.2.3 Permission When “Allow” button is clicked, “You Tube” website will show you the permission page. In this step, you have finished the setting on ”You Tube” website. 4.2.4 Save Please click “Save” on Media Converter to complete the setting. 4.2.
Remote Control __________________________________________________________ 4.1 Remote Control 1. 2. 3. 4. 5. 6. 7. 8. 9. POWER (on/off) HOME (return to main page) NUMBER 0 to 9 Channel Up Channel Down Volume Up Volume Down Record Channel return 10. 11. 12. 13. 14. 15. 16. 17. 18.
