Operating instructions

Issue Date: 2003-09-25 Page 25 of 42 Report Reference # E203413-A17-CB-1
IEC 60950
Clause Requirement + Test Result - Remark Verdict
TRF No.: 1950__F UL International Demko A/S TRF originator: FIMKO
5.1 Touch current and protective conductor current Pass
5.1.1 General See below. Pass
5.1.2 Equipment under test (EUT) Equipment designed for
connection to only one power
source.
Pass
5.1.3 Test circuit Single phase equipment
intended only for connection to
star TN or TT system.
Pass
5.1.4 Application of measuring instrument Test made to 10X20 cm metal
foil in contact with accessible
non-conductive part.
Pass
5.1.5 Test procedure Pass
5.1.6 Tes t measurements Pass
Test voltage (V)..................................................: 254 V ac -
Measured current (mA).......................................: 0.025 A maximum -
Max. allowed current (mA)..................................: 0.25 mA. -
5.1.7 Equipment with touch current exceeding 3.5 mA ..: N/A
5.1.8 Touch currents to and from telecommunication
networks
No TNV circuit. N/A
5.1.8.1 Limitation of the touch current to a
telecommunication network
N/A
Test voltage (V)..................................................: -
Measured current (mA).......................................: -
Max. allowed current (mA)..................................: -
5.1.8.2 Summation of touch currents from
telecommunication networks
N/A
5.2 Electric Strength Pass
5.2.1 General Based on the electric strength
test the use of the insulating
materials within the equipment
is satisfactory.
Pass
5.2.2 Test procedure No insulation breakdown
detected during the test.
(see appended table 5.2)
Pass