Operating instructions

ManualsBrandsMSI ManualsAdapterEC14H

Issue Date: 2003-09-25 Page 39 of 42 Report Reference #

E203413-A17-CB-1

IEC 60950

Clause Requirement + Test Result - Remark Verdict

TRF No.: 1950__F UL International Demko A/S TRF originator: FIMKO

4.5.2 TABLE: ball pressure test of thermoplastics Pass

allowed impression diameter (mm)..................... :

2 mm

—

part test temperature (°C)

impression diameter

(mm)

Enclosure, GE Plastics/945, 2.4 mm 125 1

supplementary information:

5.2 TABLE: electric strength tests and impulse tests Pass

test voltage applied between: test voltage (V) breakdown

Yes / No

Primary to SELV 4242 Vdc No

Primary to Enclosure with foil 4242 Vdc No

T1 primary winding to SELV winding 3000 Vac No

T1 primary winding to core 3000 Vac No

T1 SELV winding to core 3000 Vac No

supplementary information:

5.3 TABLE: fault condition tests Pass

ambient temperature (°C) .................................. :

See below

—

model/type of power supply............................... :

—

manufacturer of power supply............................ :

—

rated markings of power supply ......................... :



component

No.

fault test voltage

(V)

test time fuse

No.

fuse current

(A)

result

C25 Short 240 Vac

＜ 1S

-- 0.03 - 0 Breaker open, NB, NC, NT.

T1 (B1-B2) Short 240 Vac 2 hrs -- 0.03 NO, NB, NC, NT, CT.

Maximum temperature T1

coil: 58 degree C, Ambient:

25.7 degree C.

T1 (G1-G2)

Short 240 Vac 2 hrs -- 0.03 NO, NB, NC, NT, CT.

Maximum temperature T1

coil: 51.3 degree C,

Ambient: 25.8 degree C.

RJ45 Pin1-

8 to ground

Overload 240 Vac 1 min -- 0.03 NO, NB, NC, NT. Open

circuit voltage measured 0