Operating instructions

Issue Date: 2003-09-25 Page 5 of 25 Report Reference # E203413-A17-CB-1
IEC 60950
SubClause Difference + Test Result - Remark Verdict
UL International Demko A/S
H.c c) A license in accordance with Clau
se 1 is also not
required by persons who operate a X-ray emission
source on which the electron acceleration voltage
exceeds 20 kV if:
1) The X-
ray emission source has been granted a
type approval and
2) It is adequately indicated on the X-ray
emission source that
i) X-rays are generated
ii) the device stipulated by the manufacturer or
importer guarantees that the maximum permissible
local dose rate in accordance with the type
approval is not exceeded and
iii) the electron acceleration voltage not exceed
the maximum value stipulated by the manufacturer
or importer
N/A
H.d d) Furthermore, a license in accordance with
Clause 1 is also not required by persons who
operate X-ray emission source on which the
electron acceleration voltage does not exceed 30
kV if:
1) the X-rays are generated only intrinsically
safety CRTs complying with Enclosure III, No. 6
2) the values stipulated in accordance with
Enclosure III, No. 6.2 are limited by technical
measured and specified in the device and
3) it is adequately indicated on the X-ray emission
source that the X-rays generated are adequately
screened by the intrinsically safe CRT.
N/A