Operating instructions

Issue Date: 2003-09-25 Page 16 of 25 Report Reference # E203413-A17-CB-1
IEC 60950
SubClause Difference + Test Result - Remark Verdict
UL International Demko A/S
6.1.2.2 The exclusions are applicable for PERMANENTLY
CONNECTED EQUIPMENT and PLUGGABLE -
EQUIPMENT TYPE B only.
N/A
Switzerland - Differences to IEC60950, Third Edition (1999)
1.5.1 Add the following:
NOTE: Switches containing mercury such as
thermostats, relays and level controllers are not
allowed.
N/A
1.7.15 Annex 4.10 of SR 814.013 (Ordinance on
environmentally hazardous substances) applies for
batteries.
N/A
3.2.1 Supply cords of equipment having a rated current
not exceeding 10 A shall be provided with a plug
complying with SEV 1011 or IEC 884-1 and one of
the following dimension sheets:
SEV 6532-2.1991 Plug Type 15 3P+N+PE
250/400 V,10 A
SEV 6533-2.1991 Plug Type 11 L+N
250 V,10 A
SEV 6534-2.1991 Plug Type 12 L+N+PE
250 V,10 A
EN 60309 applies for plugs for currents exceeding
10 A.
N/A
6.1 Protective means in the equipment shall not
prevent transient surge protection in the
telecommunication network from operating properly
(d.c. spark-over voltage of the surge suppressor
installed in the telecommunication network: approx.
245 V).
N/A