CHAPTER 1 Preface
1-2 Preface Table of Content Preface Table of Content .............................................................................................................................1-2 Regulations Information................................................................................................................1-4 FCC-B Radio Frequency Interference Statement .....................................................................1-4 FCC Conditions ........................................................
1-3 Preface Getting Started Power Management .......................................................................................................................3-2 Battery Power ............................................................................................................................3-2 AC Power ..................................................................................................................................3-3 Basic Operations .........................................
1-4 Preface Regulations Information FCC-B Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
1-5 Preface Shield interface cables and AC power cord, if any, must be used in order to comply with the emission limits. FCC Conditions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation.
1-6 Preface Safety Instructions Read the safety instructions carefully and thoroughly. All cautions and warnings on the equipment or user’s manual should be noted. Keep the User’s Guide that comes with the package for future reference. Keep this equipment away from humidity and high temperature. Lay this equipment on a stable surface before setting it up. The openings on the enclosure are used for air convection and to prevent the equipment from overheating. Do not cover the openings.
1-7 Preface Do not leave the equipment in an unconditioned environment with a storage temperature above 60°C (140°F) or below 0°C (32°F), which may damage the equipment. The unit should be operated under maximum ambient temperature of 40°C (120°F). Make sure the power voltage is within safety range and has been adjusted properly to the value of 100~240V before connecting the equipment to the power outlet. Always unplug the AC power cord before installing any add-on card or module to the equipment.
1-8 Preface Always keep the strong magnetic or electrical objects away from the equipment. When installing the coaxial cable to the TV Tuner, it is necessary to ensure that the metal shield is reliable connected to protective earthing system of the building. Cable distribution system should be grounded (earthed) in accordance with ANSI/NFPA 70, the National Electrical Code (NEC), in particular Section 820.93, Grounding of Outer Conductive Shield of a Coaxial Cable.
1-9 Preface Green Product Features Reduced energy consumption during use and stand-by Limited use of substances harmful to the environment and health Easily dismantled and recycled Reduced use of natural resources by encouraging recycling Extended product lifetime through easy upgrades Reduced solid waste production through take-back policy Environmental Policy The product has been designed to enable proper reuse of parts and recycling and should not be thrown away Users should contact the
1-10 Preface Safety Guideline for Using Battery (English) CAUTION: Danger of explosion if battery is incorrectly replaced. recommended by the equipment manufacturer. Replace only with the same or equivalent type Discard used batteries according to manufacturer’s instructions. (French) (Français) ATTENTION: II y a danger d’explosion s’il y a remplacement incorrect de la batterie. uniquement avec une batterie du meme type ou d’un type équivalent recommandé par le constructeur.
1-11 Preface (Turkish) (Türkçe) UYARI: Pil yanlıs yerleştirilirse patlayabilir. Aynı ya da muadili bir pille degistiriniz. Kullanılmış pilleri üreticinin talimatlarına göre degerlendiriniz. (Greek) (Ελληνικά) ΠΡΟΣΟΧΗ: Κίνδυνος έκρηξης εάν η μπαταρία τοποθετηθεί λανθασμένα. Να αντικαθιστάτε μόνο με τον ίδιο ή αντίστοιχο τύπο με αυτό που συνιστά ο κατασκευαστής του εξοπλισμού. Να απορρίπτετε τις χρησιμοποιημένες μπαταρίες ως απορρίμματα σύμφωνα με τις οδηγίες του κατασκευαστή.
1-12 Preface (Korean) (한국어) 경고:발열,화재,폭발 등의 위험을 수반할 수 있으니 다음 사항을 지켜주시기 바랍니다.
1-13 Preface sesuai petunjuk pabrik (Serbian) (Srpski) OPREZ: Ukoliko baterija nije ispravno postavljena, postoji opasnost od eksplozije. Zamenu izvršite koristeći isključivo istu ili ekvivalentnu bateriju koju preporučuje proizvođač opreme. Odbacite iskorišćene baterije u skladu sa uputstvima proizvođača. (Netherlands) (Nederlands) LET OP: Er is explosiegevaar als de batterij niet goed geplaatst wordt.
1-14 Preface Baterijo zamenjajte le z enako ali ekvivalentno vrsto, ki jo priporoča proizvajalec. Odpadne baterije odstranite skladno z navodili proizvajalca. (Danish) (Dansk) ADVARSEL! batteri af same fabrikat og type. Lithiumbatteri --- Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun ske med Levé det brugte batteri tilbage til leverandøren. (Norwegian) (Norsk) ADVARSEL: Eksplosjonsfare ved feilaktig skifte av batteri. tilsvarende type anbefalt av apparatfabrikanten.
1-15 Preface WEEE Statement (English) Under the European Union ("EU") Directive on Waste Electrical and Electronic Equipment, Directive 2002/96/EC, which takes effect on August 13, 2005, products of "electrical and electronic equipment" cannot be discarded as municipal waste anymore and manufacturers of covered electronic equipment will be obligated to take back such products at the end of their useful life.
1-16 Preface non possono più essere eliminati come rifiuti municipali: i produttori di detti materiali saranno obbligati a ritirare ogni prodotto alla fine del suo ciclo di vita.
1-17 Preface (Hungarian) (Magyar) Az Európai Unió („EU") 2005. augusztus 13-án hatályba lépő, az elektromos és elektronikus berendezések hulladékairól szóló 2002/96/EK irányelve szerint az elektromos és elektronikus berendezések többé nem kezelhetőek lakossági hulladékként, és az ilyen elektronikus berendezések gyártói kötelessé válnak az ilyen termékek visszavételére azok hasznos élettartama végén.
1-18 Preface (Vietnamese) (Tieng Viet) Theo Hướng dẫn của Liên minh Châu Âu ("EU") về Thiết bị điện & điện tử đã qua sử dụng, Hướng dẫn 2002/96/EC, vốn đã có hiệu lực vào ngày 13/8/2005, các sản phẩm thuộc "thiết bị điện và điện tử" sẽ không còn được vứt bỏ như là rác thải đô thị nữa và các nhà sản xuất thiết bị điện tử tuân thủ hướng dẫn sẽ phải thu hồi các sản phẩm này vào cuối vòng đời.
1-19 Preface (Romanian) (Română) În baza Directivei Uniunii Europene ("UE") privind Evacuarea Echipamentului Electric şi Electronic, Directiva 2002/96/EC, care intră în vigoare pe 13 august, 2005, produsele din categoria "echipament electric şi electronic" nu mai pot fi evacuate ca deşeuri municipale, iar fabricanţii echipamentului electronic vizat vor fi obligaţi să primească înapoi produsele respective la sfârşitul duratei lor de utilizare.
1-20 Preface kot običajne komunalne odpadke, proizvajalci zadevne elektronske opreme pa so zavezani, da tovrstne izdelke na koncu njihove življenjske dobe sprejmejo nazaj. (Danish) (Dansk) I henhold til direktiv fra den europæiske union (EU) vedrørende elektrisk og elektronisk affald , Direktiv 2002/96/EC, som træder i kraft den 13. august 2005, må produkter som "elektrisk og elektronisk udstyr" ikke mere bortskaffes som kommunalt affald.
)) (Persianﻓﺎرﺳ ﻲ( اﺗﺤﺎدﻳﻪ اروﭘﺎ( ﮐﻪ از ﺗﺎرﻳﺦ 13ﺁﮔﻮﺳﺖ ﺳﺎل 2005ﻣﻴﻼدﯼ ﻗﺎﺑﻞ اﺟﺮاﺳﺖ ،ﮐﻠﻴﻪ ﺷﺮﮐﺖ هﺎﯼ 2002/96/ECﺑﺮ ﻃﺒﻖ ﻗﺎﻧﻮن دﻓﻊ زﺑﺎﻟﻪ هﺎﯼ اﻟﮑﺘﺮﻳﮑﯽ و اﻟﮑﺘﺮوﻧﻴﮑﯽ )ﺑﻨﺪ ﺗﻮﻟﻴﺪ ﮐﻨﻨﺪﻩ ﻣﻮﻇﻒ ﺑﻪ ﺟﻤﻊ ﺁورﯼ زﺑﺎﻟﻪ ﻣﺤﺼﻮﻻت ﺧﻮد ﭘﺲ از ﭘﺎﻳﺎن دورﻩ ﻣﺼﺮف ﻣﯽ ﺑﺎﺷﻨﺪ.
CHAPTER 2 Introductions
2-2 Introductions Congratulations on becoming an user of this product, the finely designed tablet PC. This brand-new exquisite tablet PC will give you a delightful and professional experience in using it. We are proud to tell our users that this product is thoroughly tested and certified by our reputation for unsurpassed dependability and customer satisfaction. Manual Map This User’s Manual provides instructions and illustrations on how to operate this tablet PC.
2-3 Introductions These accessories listed above may change without notice. Unpacking First, unpack the shipping carton and check all items carefully. If any item contained is damaged or missing, please contact your local dealer immediately. Also, keep the box and packing materials in case you need to ship the unit in the future.
2-4 Introductions Specification Physical Characteristic Enjoy 7 Dimension 199 (W) x 123 (D) x 11.8 (H) mm Weight 395g with battery Enjoy 10 Dimension 245.9 (W) x 192.7 (D) x 11.
2-5 Introductions Power Enjoy 7 AC/DC Adapter 5V, 2A Battery Type 1 cell Enjoy 10 AC/DC Adapter 12V, 2A Battery Type 2 cells I/O Port Mini USB Connector x 1 (Enjoy 7), x2 (Enjoy 10) Headphone out x1 Mini HDMI Connector x1 Internal Microphone x1 Card Reader (Micro SD) x 1 (Maximum 32GB) The supported memory cards may vary without notice.
2-6 Introductions Audio Internal Speaker 2 speakers with housing Sound Volume Adjust by volume button Display Enjoy 7 LCD Type 7.0" LED panel LCD Resolution 800 x 480 Enjoy 10 LCD Type 10.
2-7 Introductions Others ALS Supported e-Compass Supported G-Sensor Supported Motor Supported Special Notification The actual function preinstalled in this product depends on the model you purchased, and may vary without notice.
2-8 Introductions Product Overview This section provides the description of basic aspects of this tablet PC. It will help you to know more about the appearance of this device before using it. Please be aware that the device shown in this section may vary from the actual one that users purchased. Enjoy 10 1 4 3 2 The figures show here are for reference only.
2-9 Introductions 16 15 17 5 6 7 8 10 11 12 9 13
2-10 Introductions Enjoy 7 1 2 2 3
2-11 Introductions 16 17 15 6 5 4 13 8 7 14
2-12 Introductions 1. Rear Webcam This built-in Rear Webcam can be used for picture taking, video recoding or conferencing, and any other interactive applications. 2. Stereo Speakers Give high quality sound blaster with stereo system and Hi-Fi function supported. 3. Reset Hole When your tablet PC is crashed, you can use a straightened paperclip to inset the reset hole to reset the tablet PC. 4. Card Reader The built-in card reader may support memory card – Micro SD (Secure Digital) card.
2-13 Introductions 6. Volume Up / Volume Down Press the Volume Up or Volume Down button to decrease or Volume Up increase the sound volume. Read the icon on behalf of the Sound Level Status appearing on the display to learn the function status. Volume Down 7.
2-14 Introductions 10. Mini USB Port (Host) Through the USB to mini USB cable, the mini USB port allows you to connect USB-interface peripheral devices, such as mouse, keyboard, modem, portable hard disk module, printer and more. 11. Mini USB Port (Device) The mini USB port allows you to connect to the tablet PC. 12. Power Connector Provided to connect the AC/DC adapter and supply AC power for this tablet PC. 13.
2-15 Introductions Return This key will switch to the previous page or action . 14. Mini USB Port (Slave + Device) Through the OTG cable, the mini USB port allows you to connect USB-interface peripheral devices, such as mouse, keyboard, modem, portable hard disk module, printer and more. Besides, the mini USB port also allows you to connect to the tablet PC. 15.
2-16 Introductions 17. Multi Touch Display This tablet PC is equipped with a user-friendly multi touch display which lets users use hands or finger gestures to interact with multi-media content, play games, read e-books, access documents, create special effects, manipulate art and photographs, and even surf on the internet, in a truly unique and compelling way.
CHAPTER 3 Getting Started
3-2 Getting Started Power Management Battery Power This tablet PC is equipped with a high-capacity Lithium polymer battery pack. The rechargeable Lithium polymer battery pack is an internal power source of this device. However, the battery equipped is not replaceable by users, and may be damaged if users try to disassemble the product and the battery pack installed inside on their own.
3-3 Getting Started Charging the Battery Pack The battery pack equipped is rechargeable, however please pay attention to the following tips before recharging the battery: Plug in an external AC/DC adapter. You can use the system, suspend system operation or shut down and turn off the system without interrupting the charging process. The battery pack installed inside the device uses Lithium-ion battery cells that have no “memory effect.” It is unnecessary to discharge the battery before recharging.
3-4 Getting Started Connecting the AC Power 1. Unpack the package to find the AC/DC adapter. 2. Plug the DC end of the adapter to the tablet PC, and plug the AC/DC adapter to the electrical outlet. Disconnecting the AC Power When disconnecting the AC/DC adapter, you should: 3. Unplug the AC/DC adapter from the electrical outlet first. 4. Unplug the DC end of the adapter from the tablet PC.
3-5 Getting Started Basic Operations If you are a beginner to this tablet PC, please read the following instructions to assure your own safety, and make yourself comfortable during the operations. Safety and Comfort Tips This tablet PC is a portable platform that allows you to work anywhere. However, choosing a good workspace is important if you are going to use your tablet PC for a long period of time. Your work area should have enough illumination.
3-6 Getting Started Power On the Tablet PC To power on the tablet PC, follow the steps below: 1. Find the location of the Power Button as shown in the figure, 2. Press the Power Button to power on the tablet PC.
3-7 Getting Started Unlock the Tablet PC After power on the tablet PC, you can see the lock screen as below, please refer to the following instruction to unlock the tablet PC. 1. Tap and drag the lock icon upward as shown on the screen. 2.
3-8 Getting Started The Introduction of the Desktop 1 2 3 4 5 6 7 8 9 10 12 11 12
3-9 Getting Started 1. Home Switch to desktop. 2. Battery Status Show present battery status. 3. Time Show present time. 4. Volume down Decrease the sound volume. 5. Volume up Increase the sound volume. 6. Return Switch screen to the previous page or action. 7. Menu Launch Menu function.
3-10 Getting Started 8. Browser Launch the Internet browser. 9. Programs Activate the programs list. 10. Setting Change the setting of the tablet PC. 11. Programs Shortcuts The shortcuts of the default programs. 12. Page Show the present page location. Please be noted that the desktop may update depends on the firmware you use.
3-11 Getting Started Rotating the Display This tablet PC is equipped with G-sensor module which gives users an enjoyable experience in viewing web pages, documents, pictures, videos, etc. Whenever the display is rotated, the screen will be rotated and expanded to fit the display automatically.
3-12 Getting Started Using the Quick Launch Touch Sensors This tablet PC provides several quick launch touch sensors. Use these sensors to activate the specific applications or tools. Search This key will Search application. The figures show here are for reference only.
3-13 Getting Started Home This key will switch to desktop. Menu This key will launch Menu function.
3-14 Getting Started Return This key will switch to the previous page.
3-15 Getting Started Connecting the Network Tap “Setting” button on the main screen Æ Select “ Wireless & networks” Æ Select “Wi-Fi” to turn on WiFi firstly Æ Select “Wi-Fi settings”, then the available wireless list will show on the screen. Choose one network that you would like to use and enter the authorized password you get.
3-16 Getting Started Language & Keyboard Settings Tap “Setting” button on the main screen Æ (1) Select “Language & Keyboard” Æ (2) Select “Select language” to (3) choose the language or (4) select the available keyboard settings.
3-17 Getting Started (2) (3)
3-18 Getting Started (4)
3-19 Getting Started Date & Time Settings Tap “Setting” button on the main screen need.
3-20 Getting Started Connecting the External Devices The I/O (input/output) ports on the tablet PC allow users to connect peripheral devices. All devices listed here are for reference only. Connecting the Communication Devices Using Wireless LAN Connection This tablet PC is equipped with wireless LAN module which allows users to perform fast data transmission with the standard IEEE 802.11 for wireless LAN.
3-21 Getting Started
3-22 Getting Started Connecting the Peripheral Devices Connecting the USB devices This tablet PC provides mini USB ports for connecting various USB devices, such as mouse, keyboard, digital camera, webcam, printer, and external optical storage device, etc. To connect these devices, install the drivers for each device first if necessary, and then connect the device to the tablet PC.
3-23 Getting Started Connecting the External Display Devices to Mini HDMI port Mini HDMI (High Definition Multimedia Interface) is a new interface standard for PCs, displays and consumer electronics devices that supports standard, enhanced and high-definition video, plus multi-channel digital audio on a single cable. Once the display is connected to the tablet PC, power on the tablet PC and the external display should respond by default.
3-24 Getting Started How to Update Tablet PC Firmware You can update the firmware of your tablet PC through another notebook or desktop PC. Please check the latest firmware version of your tablet PC to make sure it is up-to date. To update the firmware can enhance the performance of your tablet PC, please see the following instruction for more updating instructions. Before updated the firmware of your tablet PC, you need to: Backup your personal data on your tablet PC.
3-25 Getting Started Step 1. Please download the latest firmware of your tablet PC from the following website location http://www.msi.com Please be noted that if you cannot get the latest firmware from this website, please contact the local dealer for detailed information. To take Enjoy 10” for example, please go to the above website location and select “Download” this item, then choose the following zip file to find the latest firmware.
3-26 Getting Started Step 2. Connect USB to mini USB cable to your notebook (or desktop PC) and table PC. Please be noted that the USB connector may differ from the actual tablet PC you purchase.
3-27 Getting Started Step 3. Please open the message on the top left of the screen of your table PC. Step 4. Please select “USB Connected”.
3-28 Getting Started Step 5. Please select “Turn on USB storage”. Step 6. On the notebook or your desktop PC, an auto-play dialog box with “MSI WINPAD” will pop up on the screen, please select “Open folder to view files”.
3-29 Getting Started Step 7. Please copy the new firmware to root directory on WINDPAD. Note1: The filename must be “update.img”, if not, please rename the image name to update.img. Note2: Remember to put the firmware file to root directory.
3-30 Getting Started Step 8. Please select “Turn off USB Storage”. Step 9. Please select “Install”. You can select “Cancel” to update the firmware later on. Please follow the above instruction to turn on/off USB storage setting and back to this dialog box again.
3-31 Getting Started Step 10. Please keep your USB cable connected. The system will auto reboot after updating the firmware. Important: Do not touch the screen when the system is updating the firmware. Step 11. Please select “Menu” and then select “Settings”, this step is to confirm the firmware version.
3-32 Getting Started Step 12. Please select “About Device” Step 13. Please confirm the “Build number” is the latest. The firmware update is completed.
