User`s manual

MS-7367 Mainboard

B-2

RAID Configuration

Creating and deleting RAID set and performing other RAID setting up operations are

done in the RAID BIOS. During bootup, a screen similar to the one below will appear

for about few seconds. Press <Ctrl-F> to enter the FastBuild utility.

The Fast Build Utility menu screen will appear. The Main Menu is used to choose the

operation to be performed.

Important

Be sure to set the OnChip SATA Type to “RAID” in BIOS (the path is :

Intergrated Peripherals => On-Chip ATA Devices => OnChip SATA Type)

before configuting the RAID BIOS.