Notebook Software Application Manual V3.
Software Application Manual Copyright Notice The material in this document is the intellectual property of MICRO-STAR INTERNATIONAL. We take every care in the preparation of this document, but no guarantee is given as to the correctness of its contents. Our products are under continual improvement and we reserve the right to make changes without notice. Trademarks All trademarks are the property of their respective owners. SRS Premium Sound, SRS and the symbol are trademarks of SRS Labs, Inc.
Preface 1-3 About This Manual This Software Application Manual provides instructions and illustrations on installing and using the software applications which are exclusively designed by MSI. This manual will give users more on how your notebook can be more efficient, convenient, and enjoyable with the help of these software applications. The software applications selected here may be optionally supported for particular models. Contact the local dealer for further information if necessary.
Software Application Manual True Color (for selected models only) ...................................................... 69 True Color allows users to select the best color setting for the content being viewed. It characterizes and controls laptop panels for precise image presentation. When the application is launched, the display automatically changes to the assigned color setting. Shortcut Manager (for Workstation Series only) .......................................
Preface 1-5 Note 5
Software Application Manual Dragon Gaming Center When the Dragon Gaming Center application has been installed successfully, its launching icon will appear in the system tray. Click on this icon to launch. Main Window 1. System Monitor: This item shows current system loading information. 2. Utility: Default has included some pre-installed software shortcuts. 3. Instant Play: This item includes settings regarding gaming mode environment. 4.
Preface 1-7 System Monitor The field shows real-time readings of major components including CPU/GPU, memory, temperature and network speed. Loading Status This item shows current status of CPU, memory, battery capacities, disk I/O loading, GPU, current power scheme, power consumption while AC power is unplugged, and fan speed. Temperature This item shows GPU and CPU temperature. Click on F can switch to Fahrenheit degree while click on C to Celsius degree.
Software Application Manual Utility This function integrates a maximum of nine shortcuts of software and utilities embedded in the notebook.
Preface 1-9 Instant Play Instant Play function allows users to define several features in P1 key shortcut or a combination of Fn + F4 key. One can designate an immediate startup for one specified game, set the key as a quick switch to ECO Gaming mode and adjust hardware configuration. Instant Play Play Key Setting Select to set one game for instant play. Press a combination of Fn + F4 key or a P1 key (if available), or click the game icon to enter game mode and launch the game immediately.
Software Application Manual Game List This tab gives you an easy and quick management of installed game database. Users can add shortcuts of your computer games by clicking "Add" in Game List.
Preface 1-11 Display & Audio Click on Apply Setting to switch to game mode where Display and Audio adjustments will be available in game mode from Instant Play. Mouse Click on Apply Setting to switch to game mode where Mouse adjustments will be available in game mode from Instant Play.
Software Application Manual Resource Release This item allows users check to remove unnecessary programs in End Task List for optimal gaming performance.
Preface 1-13 Hybrid Power (optionally supported) This function empowers users to monitor current Hybrid Power status. Hybrid Power Status Chart This item indicates the duration of the Hybrid Power mode the system has entered in the last 60 seconds. Hybrid Power Ability Hybrid Power shows current status of Hybrid Power mode and the function is only available in selected models.
Software Application Manual Device Setting This tab allows user to adjust or switch on or off your device settings. Yellow indicates the selected feature enabled and white disabled. Windows key: Enable or disable the Windows Key. Touchpad: Enable or disable Touchpad. High Performance: Enable or disable High Performance power plan.
Preface 1-15 Note 15
Software Application Manual XSplit Gamecaster (XGC) Registering an account only takes a minute and lets us keep you up-to-date with the latest releases and development news, as well as storing your personal settings in the cloud for easy access on multiple devices. When the XSplit Gamecaster application has been installed successfully, its launch icon will appear in the system tray. Click on this icon to launch.
Preface 1-17 Live Streaming and Recording Below is the default tab of XSplit Gamecaster which tells you how to start Live Streaming or recording in 3 easy steps. 1. Switch to any game or open console viewer. When XSplit Gamecaster loads into your game, you will see a notification that tells you what hot key is set to open the overlay. The default hot key combination to show the XSplit Gamecaster overlay is CTRL + TAB. 2. Press CTRL + TAB to show XSplit Gamecaster overlay. 3.
Software Application Manual Share Your Recordings 1. Simply go to the Recordings tab. 2. Find the video that you wish to share. 3. Select the platform you wish to upload. The video must be uploaded to YouTube in order to share on your social networks. If you have not set up a YouTube account, follow a wizard to guide you through the process. 4. Once the video has been uploaded to YouTube, you can select the service that you wish to post the link.
Preface 1-19 Annotation The built-in annotation feature enables you to draw and highlight selected parts of the gameplay. 1. 2. Hit CTRL + TAB to open your overlay, and select annotation icon in the top bar. Press the F1 key to see the variety of tools available in annotation mode. To exit annotation mode press the ESC key. 3. You can add your commentary through drawings, sketches, and etc.
Software Application Manual Add a Webcam With XSplit Gamecaster, it's easier than ever to add your webcam whether live streaming or recording. Simply bring up the in-game overlay, click the camera button and then position it anywhere. You need to press Fn + F6 to turn the Webcam function on beforehand. 1. Add a webcam is Settings Tab. First, make sure you have your desired camera selected in the Settings tab of the XSplit Gamecaster window. 2. 3.
Preface 1-21 Use Chroma Key You can also activate Chroma Key and make your broadcast look even more immersive using a green screen transparency effect. Chroma keying allows you to take advantage of a chroma-compatible backdrop such as a green screen to immerse yourself within the game play footage. Red, blue, and green are the available colors for keying and you can adjust the threshold of the chroma key via the provided slider. 1. Locate CHROMA KEY in the Settings Tab, click it to enable. 2.
Software Application Manual In Game HUD Set your camera to be visible to your screen viewer in-game to your viewer. 1. Go to where your camera's position in the overlay, check the In Game HUD to ON. 2. There you go, the screen shows in game HUD visibility to see the chat in game.
Preface 1-23 In-game Overlay Introduction Add a drawing to your stream or recording. Share your live stream on your social networking sites. Open Twitch panel to chat and edit broadcast title. Chat via twitch Chat button allows you to make a Twitch chat. Enable Camera. Adjust the volume. And turn on or turn off your microphone.
Software Application Manual Accounts The Accounts tab give you access to live streaming, video sharing and social networks. Do it all from a simple user-interface that works directly inside your favorite video game.
Preface 1-25 Image Overlay Customize your game by adding an image overlay. Use it to add your clan logo, your social media links or even a full screen game overlay. First, you need to update to the latest version of XSplit Gamecaster v. 1.7. The feature will not be available in old versions of XSplit Gamecaster. Look on the Start tab of XSplit Gamecaster and you will be prompted if you are not on the latest version. Change the image overlay 1.
Software Application Manual Adjust the image overlay When clicking on your chosen image, you can re-position the image by dragging it or resize the image by dragging the image outline.
Preface 1-27 The Image Overlay Toolbar When you click on your chosen image, an outline will appear with various highlighted sections that you can use to resize the image. You can re-position the image by dragging the image. Visibility The first option toggles visibility modes for the image. You can choose whether to show the image to your viewers and/or yourself. Opacity Set the opacity of Image Overlay. This controls the transparency of the image. A value of 100% means no transparency.
Software Application Manual Aspect Ratio Lock The third option (the arrow) toggles image aspect ratio lock on/off. It is usually suggested to keep this "on".
Preface 1-29 Note 29
Software Application Manual SteelSeries Engine 2 (SSE 2) When the SteelSeries Engine 2 application has been installed successfully, its launch icon will appear in the system tray. Click on this icon to launch. Main Window 1. Device Name: Shows model name of your notebook. 2. Function Pages: Select major functions from Buttons, Colors, Settings, Properties, and Statistics tabs. 3. News: Click to link to SteelSeries news webpage. 4.
Preface 1-31 Buttons This tab allows user to assign custom actions to any programmable button, and to see a layout of the laptop with a brief overview of the assignment. After installing the SteelSeries Engine 2, you will need to right click on the icon in the taskbar and open it. 1. Scale Here you can choose to scale the keyboard on this screen. On to scale keyboard to the size of your screen or Off to the size of original pixel size. 2.
Software Application Manual Action Type SteelSeries 2 application allows you to choose between four types of actions for a key Keypress Macro, Text Macro, Launch Application and Disable Key. Keypress Macro The Keypress Macro type simulates mouse and keyboard inputs at a kernel level. 1. Designate a hotkey from keyboard layout. 2. Name the hotkey in Name field. 3. Select Keypress Macro in Action Type dropdown menu. 4. Enter Keypresses and click Record Delays to record delay between signals. 5.
Preface 1-33 33
Software Application Manual Text Macro The "Text Macro" type is used to copies and pastes the specified text. 1. Designate a hotkey from keyboard layout. 2. Name the hotkey in Name field. 3. Select Text Macro in Action Type dropdown menu. 4. Enter strings in Text field. Multilingual strings supported. 5. Set hotkeys for Start Key and Send Key as text macro ready, you will be able to start keystringssend in one keystroke. A macro that spams multiple keys with one keypress. 6.
Preface 1-35 Launch Application The "Launch Application" type launches the designated game or other application. 1. Designate a hotkey from keyboard layout. 2. Name the hotkey in Name field. 3. Select Launch Application in Action Type dropdown menu. 4. In Application field, select the specific application by clicking Browse. 5. Click Save in bottom left corner in the main screen.
Software Application Manual Disable Key Disable Key ensures that nothing happens when the button is pressed. Finally there's the Macro Editor that can disable the keyboard when needed, among other tasks. 1. Designate a hotkey from keyboard layout. 2. Name the hotkey in Name field. 3. Select Disable Key in Action Type dropdown menu. 4. Click Save in bottom left corner in the main screen.
Preface 1-37 Color By clicking on the Colors tab, users can fully customize the keyboard illumination from the individual and group color settings to the intensity of the illumination. Active Layer This part shows current layer of backlit keyboard.
Software Application Manual Effect User can choose backlight modes, six usage scenarios available. 1. 2. Select desired effects in the list. Set backlight LED color by clicking on a color zone, and color setting windows will pop up. Then follow the on-screen instructions to continue. 3. 38 Click Save in bottom left corner in the main screen.
Preface 1-39 Settings Select keyboard layout language You can configure the language of your keyboard layout, 17 languages available. 1. Select local language. 2. Click Save in bottom left corner in the main screen.
Software Application Manual Select User Interface language 1. Locate SteelSeries icon on system tray, and right-click Settings. 2. Select language in SteelSeries Settings Dialog and Click OK. 3. Click Save in bottom left corner in the main screen.
Preface 1-41 Properties User can launch specific profile according to corresponding games, for example, use profile 1 for First-Personal Shooting games (FPS), and profile 2 for Defense of the Ancients (DotA) games.
Software Application Manual Profiles The left hand side list in the SteelSeries Engine is specifically for Profiles - Default profiles including the SteelSeries Default and custom profiles created by the user. To import, export, rename, copy or delete a profile, right click on the profile name and select the desired function. Profiles will be applicable to SteelSeries Engine-supported devices or MSI gaming notebooks. Profile Activation Options.
Preface 1-43 Statistics Use the Statistics module to record your keyboard or mouse actions. You can then use this information to fine tune your macros as well as your key and mouse button assignments to optimize your tools to play and work. Statistics tab highlights the most frequently used keys. This solution also runs monitoring tests during any game or application, and enables users to calculate their Actions Per Minute (APM) to improve gaming efficiency and customize key locations. 1. 2.
Software Application Manual Note 44
Preface 1-45 SteelSeries Engine 3 (SSE 3) When the SteelSeries Engine 3 application has been installed successfully, SteelSeries logo will appear in the system tray. Click on the icon to access the launch SteelSeries Engine 3. SteelSeries Engine 3 is only available in selected Gaming Series only.
Software Application Manual 1. MY GEAR: The MY GEAR tab lists recognized SteelSeries devices which can be clicked to access advanced settings. 2. LIBRARY: The LIBRARY tab shows what programs trigger a configuration for each device. 3. Icons: from left to right, Update, Setting, Cloud. Update: SteelSeries Engine 3 notifies you of updates for both Engine software and firmware for your devices. Setting: Select a language in Settings and Learn more about current software and firmware in "About".
Preface 1-47 MY GEAR Images shown here are for reference only, and may be different from the actual models users purchased. 1. Macro Editor: Click "LAUNCH" to bring Macro Editor. 2. View Options: View options allow you to show or to hide Key Zone 1, Brightness and Layouts. 3. Active/Sleep Lighting Effect: User can edit backlight modules when in Active and in Sleep mode. This function is only available on GE62/GE72. 4.
Software Application Manual Macro Editor Clicking the Launch button brings up the Macro screen. Macros can be recorded with a fixed 15ms delay or in real-time. Once recorded the Macro (and its delays) can be edited and saved. 1. Click Start to record your Macros (both Mouse and Keyboard is supported). 2. Click Stop to check the recorded Macro. 3. Set Delay Option (As Recorded, Fixed Delay, or No Delay) to your preference. Select Save to finish. 4.
Preface 1-49 View Options View options allow you to show or to hide Key Zone 1, Brightness and Layouts. Uncheck left to hide Key Zone 1 and right to Brightness and Layouts. 1. Default is both checked as below. 2. You can uncheck both when needed.
Software Application Manual Active/Sleep Lighting Effect Here are total seven backlight combinations selectable from Active and Sleep tab. This function is NOT available on GT80. X6 1. 50 Steady Mode: Light up and remain steady.
Preface 1-51 2. Gaming Mode: Only the LEDs on the left remain enabled. 3. Breathing Mode: The alternating bright and dim appearance of the selected color creates a pulsating breathing effect. 4. Audio Mode: Lights with sound outputted by the laptop and enables different colors of keyboard lighting in accordance to the sound being played. Turn on the audio setting and crank the volume to 30%+. 5. Wave Mode: The LEDs alternate between the selected color and darkness in a 6.
Software Application Manual Brightness Here are four level of brightness.
Preface 1-53 Key Zone Buttons assign custom actions to any programmable button and provides an image layout of your device with a brief overview of the assignment Button Assignment 1. Click to Key Zone 1 or Key Zone 2 to bring up keyboard editor. Key Zone 2 Key Zone 1 2. All keys except the Fn key can be reprogrammed in Keyboard Buttons. Here you can assign custom actions to any of the eight programmable buttons, including Macros, Key-presses and Media functions.
Software Application Manual Marcos: Call an already edited macro. Mouse Buttons: Simulate mouse event. Click to find 8 programmable buttons (B1 to B8) as figure below. Keyboard Buttons: Simulate keyboard input. Media Buttons: Simulate media buttons. Deactivate: You can disable the keyboard when needed. Launch Application: Launch applications quickly. Launch Configuration: Switch Configuration. Note: Macros, Mouse Buttons and Keyboard Buttons support looping function.
Preface 1-55 Looping function definition 1. Play Once Every press can send signal once only. Delay time is not adjustable. Frequency of signal output is not adjustable. Signals can be triggered by pressing or releasing. 2. Play N times Pressing the key once can send signal N times. Delay time between signals can be adjusted. Frequency of signal output is adjustable. Signals can be triggered by pressing or releasing. 3.
Software Application Manual Configs You can also open a configuration window on the left, where you can access, create and edit your various profiles.
Preface 1-57 Colors With SteelSeries 3, user can edit RGB color in the software. Just one click on the color zone,. Users can enter color code or choose the color directly. This function is NOT available on GT80.
Software Application Manual Preview Live preview allows you to check edited backlight combinations real-time. The default live preview is set to on. Layouts Here you can choose your keyboard region.
Preface 1-59 LIBRARY The LIBRARY tab shows what programs trigger a configuration for each device. 1. Add An Application: Open an application. 2. Add a Device: Select a device you wish to bind to the application.
Software Application Manual Note 60
Preface 1-61 Nahimic Audio Enhancer Nahimic audio enhancer is designed to give users the best audio experience, offering various audio effects and automatic recording function. Find the Nahimic launching icon on the desktop or the system tray in the lower right-hand corner of screen. Click on this icon to launch the Nahimic application. Main Window Nahimic’s UI is composed of a main window with 3 tabs, which are Audio, Microphone and HD Audio Recorder, and a Preferences window.
Software Application Manual Audio 1. Displays the type of audio rendering device currently being used as output, as well as its current volume. This section can display the volume of the internal (built-in) speakers, headphones and external speakers. 2. Allows users to adjust the 6 audio effects applying to the current listening experience. The preset Music profile applies for any kind of mono or stereo music. The Gaming profile applies for any kind of stereo or multichannel video game.
Preface 3. 1-63 Users are also allowed to manually adjust the 6 audio effects to meet the individual needs: Bass Boost, Virtual Surround, Reverb, Frequency Leveler, Volume Boost and Voice Clarity. Bass Boost: Increases the energy in low frequencies up to +12 dB on a frequency range optimized for the audio rendering device in use.
Software Application Manual Microphone 1. Displays the type of audio recording device currently being used as output, as well as its current volume. This section can display the volume of the internal (built-in) microphone and external microphone. 2. Allows users to adjust the 3 audio effects: Voice Leveler, Noise Gate and Noise Reduction. Voice Leveler: Levels the volume of your voice in order to avoid any saturation and maintains a constant and clear communication.
Preface 1-65 3. Listen to your MIC: Turns the microphone loopback On/Off. 4. Automatic calibration: Dynamically adjusts the Noise Gate threshold and the Noise Reduction level by estimating the noise VS. signal rate. 5. Power button allows user to switch all Nahimic’s effects on and off in one click.
Software Application Manual HD Audio Recorder Supported Software XSplit Gamecaster is currently the only software supported by HD Audio Recorder. Automatic launch HD Audio Recorder will be, by default, automatically launched when a XSplit Gamecaster recording session is detected. The launch of the HD Audio Recorder enables HD audio processing over an XSplit Gamecaster recording without any adjustment.
Preface 1-67 Display pop-up settings 1. Release time of the pop-up display: 3, 5, 8 seconds. 2. Check or uncheck to enable or disable the pop-up display. 3. Note that disabling the pop-up display won’t prevent the HD Audio Recorder from running.
Software Application Manual Note 68
Preface 1-69 True Color True Color allows a user to select the best color setting for the content being viewed. It characterizes and controls laptop panels for precise image presentation. When the application is opened, the display automatically changes to the assigned color setting. When the True Color application has been installed successfully, its launching icon will appear in the system tray. Click on this icon to launch.
Software Application Manual Six View Modes There are six view modes: Gamer, Anti-Blue, sRGB, Designer, Office and Movie. For game playing. For reduce the amount of blue light that is emitted from the display to reduce eye fatigue. For accurate color when viewing images on the web. For designer applications. For office and productivity applications. For watching movies.
Preface 1-71 Hot Keys (for selected models only) True Color supports hot keys to launch the application or a control strip with access to View Modes. + : Press and hold the [Fn] key, and then press the [Z] key to launch the True Color application. Or you can use True Color quick launch button to launch it. Note: This True Color quick launch button is for selected models only.
Software Application Manual Gamer Gamer View Mode can customize to best suit the user's game preferences. Gamer View Mode Settings can be saved, exported, or imported to share with other users. Any adjustments will be automatically saved to Gamer View Mode. Gamer View Mode Settings Use the respective slider to adjust their brightness, contrast, gamma, Red, Green and Blue value. Reset Press this key can reset the value of brightness, contrast, gamma, Red, Green and Blue to the default settings.
Preface 2. 1-73 Export: Select this option to choose which profile to export. 3. Import: Select this option will open the “Open” dialog which provides a left list of file names to import. Once imported, the profile name will appear in the drop down menu. 4. Delete: Delete the profile from the drop down menu. 5. Cancel: Close the dialog box. Note: User created profiles are only visible in the View Mode where they were created. Gamer profiles are only visible in the Gamer profile drop down menu.
Software Application Manual Anti-Blue Anti-Blue View Mode can reduce the amount of blue light that is emitted from the display and provides more comfort during extended use. Select any of the Anti-Blue View Modes setting will be automatically saved to Anti-Blue. It allows the user to adjust the blue intensity and brightness value in multimedia, browsing, Office or reading mode.
Preface 1-75 sRGB sRGB View Mode can accurate color when view images on the web. It allows the user to adjust the brightness value in sRGB settings, any change will be automatically saved to sRGB View Mode.
Software Application Manual Designer Designer View Mode can customize to best suit the user's design applications. Designer View Modes can be saved, exported, or imported to shave with other users. Any adjustments will be automatically saved to Designer View Mode. Gamer View Mode Settings Use the respective slider to adjust their brightness, contrast, gamma, Red, Green and Blue value. Reset Press this key can reset the value of brightness, contrast, gamma, Red, Green and Blue to the default settings.
Preface 1-77 Office Office View Mode is designed for productivity applications commonly used in the workplace. It allows the user to adjust the brightness value in Office settings, any change will be automatically saved to Office View Mode. Movie Office View Mode can enhance your movie viewing experience. It allows the user to adjust the brightness value in Movie settings, any change will be automatically saved to Movie View Mode.
Software Application Manual Tools- App SyncTM There are 3 tools in True Color: App SyncTM, Options and Help. You can change the mode/profile of any respective activated application. This list allows the user view different content correctly and easily with the appropriate mode/profile. Press “Refresh”, “Browse” or “Delete” key can change the setting of App SyncTM. Options In the left list of the following menu, options in use will have an "X" in the check box.
Preface 1-79 Help Provides support information for True Color. Press “User Manual” can open the related user manual of True Color; click ”Check for Update” can update the current version to the latest version; press “Tech Support” can open the website of True Color; or press “Reset View Modes” can reset all the View Modes to their default values.
Software Application Manual Note 80
Preface 1-81 Shortcut Manager When the Shortcut Manager application has been installed successfully, the Shortcut Manager launching icon will appear under Programs and the system tray in the lower right-hand corner of screen. Click on this icon to launch the Shortcut Manager application.
Software Application Manual Main Window 1. Profile Manager: To add, delete, import, or export hotkey setting profiles. 2. Shortcut Enable/ Disable: To Enable or Disable the selected hotkey profile. 3. Hotkey Sets: Setting up the Hotkey Sets here. Each profile has 8 Hotkey Sets. Three shortcut types are available for selecting: Shortcuts, Commands, and Launch. 4. 5. List of Disabled Keys: 4 keys on the keyboard can be disabled for each profile.
Preface 1-83 Getting Started Now, follow the step by step instructions below to setup a personal shortcut profile in Shortcut Manager. Create a new profile Create a new profile while using Shortcut Manager. 5. Give a name for the new profile. 6. Click [OK] to continue.
Software Application Manual Define [Shortcuts] Hotkey This function makes a single hotkey to trigger at most 10 characters instantly. 1. Select a Hotkey Set from 8 Hotkey Sets. 2. Move the mouse cursor to keyboard layout and select a key for this Hotkey Set. 3. Give a name to this Hotkey Set: [MSI] 4. Select the function of this Hotkey Set: [Shortcuts] 5. To define another Hotkey Set, repeat the steps shown above. [Q] on the keyboard is selected as an example.
Preface 6. 1-85 Click on [Record] and then key in at most 10 keyboard strokes, including typewrite keys, numeric keys, cursor keys and function keys. Click on [Stop] when finish keying in. Click on [Reset] to clear the characters entered previously. Advanced Settings 1. Start Time and End Time: Adjust time length of key stroke. 2. Respond Time: Slide the scroll bar to adjust the hotkey responding rate. 3.
Software Application Manual Define [Commands] Hotkey This function makes a single hotkey to trigger a set of message content with no limit on the number of words. 1. Select a Hotkey Set from 8 Hotkey Sets. 2. Move the mouse cursor to keyboard layout and select a key for this Hotkey Set. 3. Give a name to this Hotkey Set: [Workstation] 4. Select the function of this Hotkey Set: [Commands] 5. Enter the command in texts under [Message Content] 6.
Preface 1-87 Define Compound [Commands] Hotkey A single hotkey will also be capable of triggering a compound command, if required. A compound command is composed with 3 main orders: Start key, Message Content, and Send Key. Maximum 5 movements for Start key and Send key are allowed. No limit on the number of words for Message Content. Rec Start Key/ Stop Record/ Clear Start Key: Make a Start key that comprises any command given by the keyboard, such as SHIFT, CTRL, or ALT, etc..
Software Application Manual 5. Click [Rec Send Key] 6. Give commands with the physical keyboard. 7. Click [Stop Record] 8. Click [Clear Start Key] or [Clear Send Key] to delete commands given previously for 9. Once this Hotkey Set is enabled, pressing the hotkey of [E] on the keyboard, you may example: [Left_Shift + 3 + Left_Shift + 3] Start Key or Send Key, if needed. see the result shown as below.
Preface 1-89 Define [Launch] Hotkey This function makes a single hotkey to activate a particular application, tool or file. 1. Select a Hotkey Set from 8 Hotkey Sets. 2. Move the mouse cursor to keyboard layout and select a key for this Hotkey Set. 3. Give a name to this Hotkey Set: [Paint] 4. Select the function of this Hotkey Set: [Lanuch] [T] on the keyboard is selected as an example.
Software Application Manual 5. Click on [Browse] to select an application or a file to be launched. 6. The tool of [Paint] is set to be activated for Launch hotkey as an example here. 7. To define another Hotkey Set, repeat the steps shown above.
Preface 1-91 Setup [Disabled Keys] Keys on the keyboard may be disabled temporarily if necessary. Setup the Disabled Keys under this section. 1. Click on the [Disabled Keys] section. 2. Click keys on keyboard layout to select keys to be disabled. 3. Maximum 4 keys can be disabled for each profile.
Software Application Manual Apply Hotkey Profile to keyboard Once the Hotkey Sets are defined successfully, remember to make the selections take effect for the physical keyboard. 1. Select a [Profile] 2. Click on [Shortcut Disabled] to make this button turn to [Shortcut Enabled] 3. There will be check icon for the hotkey profile which has been activated. NEW: Create a new profile. IMPORT: Import profiles from disk. EXPORT: Export profiles to disk.
Preface 1-93 Profile Editing The created Profile can be edited if needed. Move the mouse cursor to a profile and then right click the mouse. Copy/ Paste: Copy and paste an existed profile. Delete: Delete a profile. Rename: Change the profile’s name. Hotkey Sets Editing 1. Move the mouse cursor to a Hotkey Set and then right click the mouse. 2. Select [Copy], and then move the mouse cursor to another Hotkey Set where the 3. Right click the mouse again, and then select [Paste]. 4.
Software Application Manual Keyboard Language Selections Shortcut Manager supports multilingual user interface for the keyboard.
Preface 1-95 Note 95
Software Application Manual Keyboard LED Manager (KLM) When the KLM application has been installed successfully, the KLM launching icon will appear under Programs and the system tray in the lower right-hand corner of screen. Click on this icon to launch the Keyboard LED Manager application. Standard Status and Idle Status KLM allows users to set different LED flashing modes under Standard status and Idle status.
Preface 1-97 Selecting the LED Flashing Mode under Standard Status Click on [ Standard ], Select a desired LED flashing mode from the option: Dual Color, Wave, Breathing, Gaming, and Normal. Normal Mode: 1. When this mode is selected, the keyboard LEDs will always stay lit with the selected color. 2. Select an LED section (A, B, or C) by clicking on the corresponding area on the diagram. 3. Select a desired LED color for each LED section by clicking on the color wheel. 4.
Software Application Manual Gaming Mode: 1. The keyboard LEDs of Section-A will always be lit to show the selected color. 2. The keyboard LEDs of Section-B and Section-C will always be disabled when Gaming mode is selected. 3. Select a desired LED color by clicking on the color wheel. 4.
Preface 1-99 Breathing Mode: 1. The keyboard LEDs of each section will be individually lit with the selected LED color and then darkened with a steady rhythm. 2. Select a desired LED color for each LED section by clicking on the color wheel. 3. The selected color for each LED section will be shown in the LED Color Indicators located below the keyboard diagram. 4. To group the three LED sections into one main section, click [ Lock Keyboard ] on the left hand side. 5.
Software Application Manual Wave Mode: 1. The keyboard LEDs of Section A, B, and C will be lit with the selected LED color in order from LED Section-C to Section-B to Section-A, and then the LEDs will darken with a steady rhythm. 2. Select a desired LED color for each LED section by clicking on the color wheel. 3. The selected color for each LED section will be shown in the LED Color Indicators located below the keyboard diagram. 4.
Preface 1-101 Dual Color Mode: 1. When Dual Color mode is selected, the keyboard LEDs will be grouped into one main section, and the keyboard LEDs will be lit with the two selected colors. 2. Select two LED colors at a time by clicking on the color wheel. 3. The two selected colors will be shown on the LED Color Indicator.
Software Application Manual Selecting the LED Flashing Mode under Idle Status Select a desired LED Flashing Mode in Idle status. The selection will take effect while the system is in Sleep mode. Click on [ Idle ], Select a desired LED flashing mode from Wave, Breathing, and Off. Off Mode: Turn off the Keyboard LED function. Breathing Mode: 1. The keyboard LEDs of each section will be individually lit with the selected LED color in order and then darkened with a steady rhythm. 2.
Preface 1-103 Wave Mode: 1. The keyboard LEDs of each section will be lit with the selected LED color in order from LED Section-C to Section-B, and to Section-A, and then dimmed in an on/off pattern. 2. Select a desired LED color for each LED section by clicking on the color wheel. 3. To group the three LED sections into one main section, click [ Lock Keyboard ], so that only one LED color can be selected for the keyboard LEDs.
Software Application Manual Grouping the LED sections The divided LED sections can be grouped into one main section by clicking on the [ Lock Keyboard ] icon. Once the three LED sections are grouped, only one color can be selected to be illuminated. Note: Grouping function will not take effect in Gaming mode. Closing the KLM interface To close the KLM interface, simply click on the [ Close ] icon.
Preface 1-105 Note 105
Software Application Manual Sizing Options (Only available in selected models) When the Sizing Options application has been installed successfully, the Sizing Options launch icon will appear in the MSI folder of the Start menu and the system tray in the lower right-hand corner of screen. 1. Left click on Sizing Options shortcut icon on the desktop or the icon in the lower right-hand corner of the screen to launch the Sizing Options application. 2.
Preface 1-107 5 Preview Windows When select one DPI setting will bring the following respective preview image: 107
Software Application Manual When change the DPI setting will bring one dialogue and ask you to sign out of the computer to apply these changes, or you can choose to sign out later, the updated DPI setting will take effect.
Preface 1-109 Best DPI for the Display We recommend you to apply the following DPI settings to get the best DPI for the display.
Software Application Manual Note 110
Preface 1-111 Battery Calibration When the Battery Calibration application has been installed successfully, the Battery Calibration launch icon will appear in the MSI folder of the Start menu. Click on this icon to launch the Battery Calibration application. It is recommended to go through the Battery Calibration process every 3 months to have the best battery life. Starting the Battery Calibration Process 1.
Software Application Manual 5. The calibration process status will be shown on the display telling users that the system is now charging, recharging, or discharging. 6. Calibration completed. Note: MSI recommends doing Battery Calibration every 3 months to have the best battery life.
Preface 1-113 Warning Notification 1. If the AC/DC adapter is disconnected during the calibration process, a warning notification will appear. 2. Please reconnect the AC/DC adapter to continue the calibration process within 15 seconds; otherwise the calibration process will stop automatically. 3. If the battery of the notebook is not installed properly or removed during the calibration process, the warning notification will appear. 4.
Software Application Manual Note 114
Preface 1-115 System Control Manager (SCM) System Control Manager (SCM) is a software application for driving and controlling the Fn keys on the keyboard. The SCM is pre-installed with the default OS and will run automatically in background. If you intend to install your own version of OS, it is required to install SCM to enable the Fn keys. Quick Launch [Fn] Keys Use the Quick Launch [Fn] buttons on the keyboard to activate the specific applications and tools.
Software Application Manual F6: Webcam F10: Airplane Mode 116
Preface 1-117 User Define key This function allows users to define the P1 quick launch button for launching the particular application. Once the shortcut has been created properly, users will be able to launch the selected program, application, utility, or path by pressing the P1 Fn key on the keyboard. Note: This function will not be available when Dragon Gaming Center is installed. To restore this function, uninstalling Dragon Gaming Center is necessarily required.
Software Application Manual Dragon Gaming Center (optionally supported) When the application of Dragon Gaming Center is installed, activate Dragon Gaming Center with Quick Launch P1 Fn key.
Preface 1-119 System Control Manager interface Besides using the [Fn] buttons on the keyboard to activate the specific applications and tools, users may also achieve the same results via the System Control Manager interface. Double right click on the SCM icon on the lower right corner of the display to bring up the System Control Manager interface as shown below. 1. Devices ON/ OFF Click on the device icon to switch the selected device on or off recurrently. 2.
Software Application Manual Note 120
Preface 1-121 Recovery Image Backup Tool Recovery Image Backup Tool, the utility designed to backup the recovery image to blank DVD disks, a USB flash disk or ISO files. They can be used to recover the system to manufacturer’s default settings when it is needed. The illustrations and instructions provided here are for reference only and may vary from different operating system supported. Usage of this application on any product with no authorization may be prohibited.
Software Application Manual 122
Preface 1-123 Create and Burn a Recovery Disk 1. To create and burn a Recovery Disk, select [Recovery Disk], and then follow the on-screen instructions to continue. 2. Prepare the number of the writable disk as requested. 3. Place the disk into the optical drive device, and then select [Burn]. 4. Note: Closing the other applications while burning the recovery disk is suggested. 5. Click [Close] when a disk is successfully created. 6.
Software Application Manual 124
Preface 1-125 125
Software Application Manual Recovering the System When the hard drive and system encountered non-recoverable problems, it is always recommended to perform the System Recovery Function with F3 Hotkey first. If the system is unable to recover to the manufactory default settings with F3 Hotkey, follow the instructions below to proceed the recovery function with the DVD recovery disks or USB flash drive. 1. Insert the DVD recovery disks to your computer. 2. Restart the computer. 3.
Preface 6. 7. 1-127 Select [Hard Disk Recovery] to restore the hard disk to the manufactory default settings. Select [System Partition Recovery] to reset the hard disk drive partition where the operating system installed to the manufactory default settings.
Software Application Manual 8. AC power is required while proceeding the System Recovery Function. Assure that the AC power is connected to the notebook before moving forward to the next step. 9. The system recovery process will format the hard disk drive; make sure that the important data has been backed up before continuing the process.
Preface 10. 1-129 If the notebook is equipped with two or more hard disks, Windows OS and recovery partitions can be restored to a single hard disk, or separated hard disks. 11. Follow the on-screen instructions to continue.
Software Application Manual 130
Preface 1-131 Note 131
