Notebook User's Manual Preface 1
Content 1. Preface...............................................................................................1-1 Copyright Notice.............................................................................................................1-4 Trademarks.....................................................................................................................1-4 Revision History..............................................................................................................
Use Multiple Monitors.............................................................................................. 2-12 Adjust the Brightness Level of the Display............................................................. 2-12 Adjust the Sound Level of the Speaker................................................................... 2-12 Adjust the Brightness Level of the Keyboard Backlight LED................................ 2-13 Video: How to Use [Fn] Buttons...............................................
Copyright Notice The material in this document is the intellectual property of Micro-Star International Co., Ltd. We take every care in the preparation of this document, but no guarantee is given as to the correctness of its contents. Our products are under continual improvement and we reserve the right to make changes without notice. Trademarks All trademarks are the properties of their respective owners. Revision History ▶▶ Version: 2.
FCC-B Radio Frequency Interference Statement ▶▶ Reorient or relocate the receiving antenna. ▶▶ Increase the separation between the equipment and receiver. ▶▶ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. NOTE ▶▶ The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Battery Regulations European Union: Batteries, battery packs, and accumulators should not be disposed of as unsorted household waste. Please use the public collection system to return, recycle, or treat them in compliance with the local regulations. Taiwan: For better environmental protection, waste batteries should be collected separately for recycling or special disposal.
RoHS Statement Japan JIS C 0950 Material Declaration http://www.msi.com/html/popup/csr/cemm_jp.html http://tw.msi.com/html/popup/csr_tw/cemm_jp.html India RoHS This product complies with the "India E-waste (Management and Handling) Rule 2011" and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule.
Upgrade and Warranty Please note that certain components, such as memory modules, HDD, SSD, ODD, and Bluetooth/WiFi combo card, etc., preinstalled in the product may be upgradable or replaceable by user’s request depending on the models users purchased. For any further information on the product users purchased, please contact the local dealer.
Safety Instructions Read the safety instructions carefully and thoroughly. All cautions and warnings on the equipment or user’s manual should be noted. Lay the notebook on a stable surface before setting it up. Do not cover the ventilators of the notebook to prevent the notebook from overheating. • Do not leave the notebook in an unconditioned environment with a storage temperature above 60ºC (140ºF) or below 0ºC (32ºF), which may damage the notebook.
• Make sure the power voltage is within safety range and has been adjusted properly to the value of 100~240V before connecting the equipment to the power outlet. • Always unplug the AC power cord before installing any add-on card or module to the equipment. • Always disconnect the AC power cord or uninstall the battery pack or switch off the wall socket if the equipment would be left unused for a certain time to achieve zero energy consumption.
MSI Highlights Explore more exclusive features of MSI notebooks for all series, please visit: http://www.msi.com and https://www.youtube.com/user/MSI MSI collaborates with SteelSeries to develop an exclusive SteelSeries Engine 3 in gaming notebooks. SteelSeries Engine 3 is the Apps to combine frequently used functions for gamers in multiple devices management.
Notebook User's Manual 1-12
Notebook User's Manual Introductions 2
Congratulations on becoming an user of this notebook, the finely designed notebook. You will have a delightful and professional experience in using this exquisite notebook. We are proud to tell users that this notebook is thoroughly tested and certified by our reputation for unsurpassed dependability and customer satisfaction. Unpacking First, unpack the shipping carton and check all items carefully. If any item contained is damaged or missing, please contact your local dealer immediately.
Product Overview This section provides the description of basic aspects of the notebook. It will help you to know more about the appearance of this notebook before using it. Please be aware that the figures shown here are for reference only. The figure of top-open view and description shown below will lead you to browse the main operating area of your notebook.
1. Webcam/ Webcam LED/ Internal Microphone • This built-in webcam can be used for picture taking, video recording or conferencing, and so on. • Webcam LED indicator, next to the webcam, glows when webcam function is activated; LED goes out when this function is turned off. • The built-in microphone and its function is the same with microphone. 2. Keyboard The built-in keyboard provides all the functions of a full-sized keyboard. Refer to How to Use the Keyboard for details. 3.
Front Side View 2. Status LED Wireless LAN (WiFi) • LED glows when WLAN (WiFi) function is enabled. • LED goes out when this function is disabled. Battery Status • LED glows when the battery is being charged. • Continuously blinking if the battery fails. • Always consult an authorized retailer or service center for purchasing or replacing an equivalent type of battery recommended by the manufacturer. • Battery LED goes out when it is fully charged or when the AC/DC adapter is disconnected.
Right Side View 1. USB 3.1 Port (Type C) USB 3.1, the SuperSpeed+ USB, delivers the higher interface speeds for connecting various devices, such as storage devices, hard drives, or video cameras, and offers more advantages over high-speed data transferring. The slim and sleek USB Type C connector features reversible plug orientation and cable direction, and supports scalable performance to future-proof solution, including USB 3.x, DisplayPort, PCIe, Audio, and Thunderbolt 3 (Optional). 2.
Left Side View 2. USB 3.0 Port USB 3.0, the SuperSpeed USB, delivers the higher interface speeds for connecting various devices, such as storage devices, hard drives, or video cameras, and offers more advantages over high-speed data transferring. 3. Audio Port Connectors Microphone Used for an external microphone. Headphone out/ S/PDIF-out • A connector for speakers or headphones. • The S/PDIF connector is also provided for digital audio transmission to external speakers through an optical fiber cable. 4.
Rear Side View 1. Ventilator The ventilator is designed to cool the system. DO NOT block the ventilator for air circulation. 2. Mini-DisplayPort The Mini-DisplayPort is a miniaturized version of the DisplayPort, with a suitable adapter, the Mini-DisplayPort may be used to drive displays with a VGA, DVI or HDMI interface.
Bottom Side View Introductions 1. Ventilator The ventilator is designed to cool the system. DO NOT block the ventilator for air circulation. 2. Battery Reset Hole Whenever the system firmware (EC) is upgraded or the system hangs, please 1) power off the notebook; 2) remove the AC power; 3) use a straightened paperclip to insert this hole for 10 sec; 4) connect the AC power; 5) power on the notebook.
How to Use the Keyboard This notebook provides a full functioned keyboard. To ensure that the keyboard will be functional properly, it is a must to install SCM application before using the keyboard function keys. € Windows Key You can find the Windows Logo key on the keyboard which is used to perform Windows-specific functions, such as opening the Start menu and launching the shortcut menu. Quick Launch Keys Use the [Fn] combination keys on the keyboard to activate the specific applications or tools.
+ ECO Mode • Press Fn and F11 keys repeatedly to turn Airplane mode on or off recurrently. Disable or Enable Touchpad + Enable or disable the touchpad function. (Optional) Enter Sleep Mode + Force the computer into sleep state (depending on the system configuration). Press the Power button to wake up the system from sleep state. Switch Display + Switch the display output mode between the LCD, external monitor and both.
Use Multiple Monitors If users connect an additional monitor to the notebook, the system will automatically detect the external monitor connected. Users will be allowed to customize the display settings. + • Connect the monitor to the notebook. • Press and hold the Windows key, and then press [P] key to bring up [Project]. • Select how you want your display to project on the second screen from the selections of PC screen only, Duplicate, Extend, and Second screen only.
Adjust the Brightness Level of the Keyboard Backlight LED Enable or disable the keyboard backlight LEDs. Video: How to Use [Fn] Buttons Watch the instruction video at: https://www.youtube.
Specifications The specifications listed here is reference only, and may change without notice. The actual products sold are different from areas. Visit MSI official website at www.msi.com, or contact the local retailers to learn the correct specifications of the product user purchased. Physical Characteristic Dimension 345 (W) x 245 (D) x 21.8-22.8 (H) mm Weight 1.
Storage HDD form factor x1, 2.5" HDD SSD x1, M.2 SSD (NVMe PCI-e/SATA) USB x 2 (version 3.0) x 1 (version 3.1)(Type C) Mic-in x1 Headphone-out x 1 (S/PDIF-Out supported) RJ45 x1 HDMI x1 Mini-DisplayPort x1 Card Reader x 1 (SD3.
Notebook User's Manual 2-16
Notebook User's Manual How To Get Started 3
Begin to Use the Notebook For a new user of this notebook, we would like to suggest you follow the illustrations below to begin to use the notebook.
How to Use the Notebook Comfortably If you are a beginner to the notebook, please read the following instructions to assure your own safety, and make yourself comfortable during the operations. ▶▶ Good illumination is essential in the work area. ▶▶ Adjust the backrest to support your lower back comfortably when you are sitting upright. ▶▶ Place your feet flat on the floor with your knees bent to a 90 degrees. ▶▶ Adjust the angle/position of the LCD panel to have an optimal view.
How to Manage Power Supply This section provides users basic safety precautions to take when using an AC/DC adapter and battery power properly. AC/DC Adapter Ensure that your notebook is connected to an AC power source via the AC adapter before turning it on for the first time. If the notebook automatically shuts down due to low battery power, it is likely to cause system failure. Below are some Dos and Don'ts of an AC/DC adapter. ▶▶ Dos • Use the adapter that shipped with your notebook only.
▶▶ Battery charging behavior To optimize battery life and avoid a sudden power loss, read the tips below: ▶▶ How to charge the battery properly Please pay attention to the following tips before recharging the battery: • If a charged battery pack is not available, save your work and close all running programs and shut down the system. • Plug in an AC/DC adapter. • You can use the system, suspend system operation or shut down and turn off the system without interrupting the charging process.
How to Set Up a Power Plan in Windows 10 A power plan is a collection of hardware and system settings that manages how your computer uses and conserves power. Power plans can save energy, maximize system performance, or balance energy conservation with performance. The default power plans — Balanced and Power saver — meet most people's needs. But you can modify settings for existing plans or create your own plan. Choose or Customize a Power Plan 1.
How To Get Started 3-7
Create Your Own Power Plan You can create your own power plan and customize it as your requirement. However, it will be recommended to use ECO Engine power saving function to optimize the battery life while using this notebook. Please refer to the section of System Control Manager (SCM) in the Notebook Software Application Manual for details. 1. Select Power Options in the menu. Click [Create a power plan] in the left pane. 2. Select an existing plan that meet your needs most, and give the plan a name.
How To Get Started 3-9
How to Use the Touchpad The touchpad integrated in your notebook is a pointing device that is compatible with standard mouse, allowing you to control the notebook by pointing the location of the cursor on the screen. ▶▶ Configure the Touchpad You can customize the pointing device to meet your personal needs. For example, if you are a left-handed user, you may want to swap the functions of the two buttons.
▶▶ Point and Click ▶▶ Drag and Drop You can move files or objects in your notebook by using drag-and-drop. To do so, place the cursor on the desired item and slightly tap twice on the touchpad, and then keep your fingertip in contact with the touchpad on the second tap. Now, you can drag the selected item to the desired location by moving your finger on the touchpad, and then lift your finger from the touchpad to drop the item into place.
How to Connect the Internet Wireless LAN Wireless LAN is a wireless broadband connection that allows you to connect to the Internet without using any cables. Follow the instructions below to set up a Wireless LAN connection. ▶▶ Wireless LAN Connection 1. Go to the desktop. Find the icon in the lower-right corner of the task bar and click on it to unfold the settings menu. 2. There are [Wi-Fi] and [Airplane mode] two options in the Network settings, select [Wi-Fi] here. 3.
▶▶ Check the Wireless LAN status When Airplane mode is enabled, Wireless LAN connection will be turned off. Before setting up a Wireless LAN connection, make sure that Airplane mode is turned off. 2. Check if Wireless LAN mode is available in the Network settings. 3. Or, find the [SCM] icon in the lower-right corner of the task bar and click on it to bring out the main window of System Control Manager, please check if Wireless LAN mode is turned on.
Wired LAN Using cables and network adapters to connect to the Internet. Before setting up the connection of Dynamic IP/PPPoE or Broadband (PPPoE) or Static IP, contact your Internet Service Provider (ISP) or network administrator for assistance of setting up Internet connection. ▶▶ Dynamic IP/PPPoE Connection icon in the lower-right corner of the task 1. Go to the desktop. Find the bar, and then right click on it to select [Open Network and Sharing Center]. 2. Choose [Change adapter settings]. 3.
How To Get Started 3-15
▶▶ Broadband (PPPoE) Connection 1. Go to the desktop. Find the icon in the lower-right corner of the task bar, right click on it to select [Open Network and Sharing Center]. 2. Select [Set up a new connection or network] under [Change your networking settings]. 3. Select [Connect to the Internet], and then click [Next]. 4. Click [Broadband (PPPoE)]. 5. Fills User name, Password, and Connection name fields. Then click [Connect].
How To Get Started 3-17
▶▶ Static IP Connection 1. Follow the previous steps 1 to 4 in Dynamic IP/PPPoE Connection. 2. Select [General] tab and click [Use the following IP address] and [Use the following DNS server addresses]. You will be asked to fill the IP address, Subnet mask, and Default gateway, and then click [OK].
How to Set Up Bluetooth Connection Bluetooth pairing is a process in which two Bluetooth devices communicate with each other through an established connection. ▶▶ Checking the Bluetooth status When Airplane mode is enabled, Bluetooth connection will be turned off. Before setting up a Bluetooth connection, make sure that Airplane mode is turned off. 1. Go to the desktop. Find the icon in the lower-left corner of the screen and click on it. 2.
Notebook User's Manual 3-20
▶▶ Pairing the Bluetooth devices 1. Go to the desktop. Find the [Bluetooth] icon in the lower-right corner of the task bar and click on it. 2. Choose [Add a Bluetooth Device]. 4. Click [Pair] to continue. 5. Match the passcode between the notebook and the selected Bluetooth device, click [Yes] to finish. 3-21 How To Get Started 3. Select one Bluetooth connection from the network list.
Notebook User's Manual 3-22
How to Connect External Devices This notebook may be equipped with various connecting I/O (input/output) ports, such as USB, HDMI, DisplayPort, and mini DisplayPort. Users will be able to connect diverse peripheral devices to the notebook. 3-23 How To Get Started To connect these devices, refer to the instruction manuals of each device first, and then connect the device to the notebook.
Video: How to Use RAID Function This notebook may support RAID function of different levels. RAID allows users to store data on multiple hard disk drives or solid state drives. Contact the local dealer for further and correct information and be noted that the supported RAID functions may vary depending on the models users purchased. Watch the instruction video at: https://youtu.
How to Select Boot Mode in BIOS 1. Power on the system. As soon as the first logo screen appears, press the DEL key immediately and enter the BIOS menu. 3. For operating systems support UEFI-based BIOS (Windows 10 and Windows 8.1), it is suggested to select [UEFI]. 4. For Windows 7 or previous versions of Windows, select [Legacy] mode. 5. Refer to MSI FAQ for further information about installing Windows operating system on the notebook at https://www.msi.com/faq/notebook-1971 3-25 How To Get Started 2.
Video: How to Restore Windows 10 Operating System on MSI Notebooks Watch the instruction video at: https://www.youtube.com/watch?v=hSrK6xAQooU, to restore the Windows 10 operating system by using [F3 Recovery] and [Windows 10 Settings] when it is needed.
Video: How to Use MSI One Touch Install MSI "One Touch Install", the one-click installer application, allows users to efficiently install all needed drivers on MSI notebooks with single click. Watch the instruction video at: Windows 7: https://www.youtube.com/watch?v=43lnM4m-500 Windows 10/ 8.1 YouTube Youku YouTube Youku Windows 7 3-27 How To Get Started Windows 10/ 8.1: https://www.youtube.
Notebook User's Manual 3-28
