Owner's Manual

En-31
Englsh
Set Lmt CPUID MaxVal to 3
The Max CPUID Value Lmt s desgned lmt the lsted speed of the processor to
older operatng systems.
Intel Vrtualzaton Tech
Ths tem s used to enable/dsable the Intel Vrtualzaton technology. For further
nformaton please refer to Intel’s ocal webste.
Intel VT-d Tech
Ths tem s used to enable/dsable the Intel Vrtualzaton Technology for Drected
I/O (VT-d). For further nformaton please refer to Intel’s ocal webste.
Intel EIST
The Enhanced Intel SpeedStep technology allows you to set the performance level of
the mcroprocessor whether the computer s runnng on battery or AC power. Ths eld
wll appear after you nstalled the CPU whch supports speedstep technology.
C1E Support
To enable ths tem to read the CPU power consumpton whle dle. Not all processors
support Enhanced Halt state (C1E).
Adjust CPU Base Frequency (MHz)
Ths tem allows you to set the CPU Base clock (n MHz). You may overclock the CPU
by adjustng ths value. Please note the overclockng behavor s not guaranteed.
OC Steppng
Ths tem wll be enabled after you set the overclockng frequency n the “Adjust CPU
Base Frequency (MHz)”. And the followng tems wll appear. Ths tems wll help the
system to overclock step by step after system bootng up.
Start OC Steppng From (MHz)
Ths tem s used to set the ntal base clock. The system wll boot wth the ntal base
clock, and start to overclock from ntal base clock to set base clock that you set n
“Adjust CPU Base Frequency (MHz)” step by step.
OC Step
Ths tem s used to set how many steps for base colck overclockng.
OC Step Count Tmer
Ths tem s used to set the buer tme for every step.
Adjust CPU Rato
Ths tem allows you to adjust the CPU rato. Settng to [Startup] enables the CPU
runnng at the fastest speed whch s detected by system.
Adjusted CPU Frequency (MHz)
It shows the adjusted CPU frequency (Base clock x Rato). Read-only.
Auto OverClock Technology
Ths tem s used to enable/ dsable the Auto OverClock functon.
Memory-Z
Press <Enter> to enter the sub-menu.
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶
▶