Preface Z97 GUARD-PRO H97 GUARD-PRO Motherboard G52-79231X1
Copyright Notice Preface The material in this document is the intellectual property of MICRO-STAR INTERNATIONAL. We take every care in the preparation of this document, but no guarantee is given as to the correctness of its contents. Our products are under continual improvement and we reserve the right to make changes without notice. Trademarks All trademarks in this manual are properties of their respective owners. ￭ MSI® is registered trademark of Micro-Star Int’l Co.,Ltd.
MSI+ is a smart web gadget that works as a shopping navigator and provides specs comparison for IT buyers. With a simple tap of the smartphone, you'll efficiently locate your ideal products from a wide variety of choices and, if product details are required, you may easily download user manuals within minutes. Better yet, the power calculator provides accurate estimates of power unit capacity for DIY users.
Safety Instructions ￭ Always read the safety instructions carefully. ￭ Keep this User’s Manual for future reference. Preface ￭ Keep this equipment away from humidity. ￭ Lay this equipment on a reliable flat surface before setting it up. ￭ The openings on the enclosure are for air convection hence protects the equipment from overheating. DO NOT COVER THE OPENINGS. ￭ Make sure the voltage of the power source is at 110/220V before connecting the equipment to the power inlet.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Radiation Exposure Statement Preface This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment and its antenna should be installed and operated with minimum distance 20 cm between the radiator and your body. This equipment and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.
Battery Information Batteries, battery packs, and accumulators should not be disposed of as unsorted household waste. Please use the public collection system to return, recycle, or treat them in compliance with the local regulations. Taiwan: For better environmental protection, waste batteries should be collected separately for recycling or special disposal.
WEEE (Waste Electrical and Electronic Equipment) Statement ENGLISH Preface To protect the global environment and as an environmentalist, MSI must remind you that...
ESPAÑOL Bajo la directiva 2002/96/EC de la Unión Europea en materia de desechos y/o equipos electrónicos, con fecha de rigor desde el 13 de agosto de 2005, los productos clasificados como “eléctricos y equipos electrónicos” no pueden ser depositados en los contenedores habituales de su municipio, los fabricantes de equipos electrónicos, están obligados a hacerse cargo de dichos productos al termino de su período de vida.
TÜRKÇE Çevreci özelliğiyle bilinen MSI dünyada çevreyi korumak için hatırlatır: Preface Avrupa Birliği (AB) Kararnamesi Elektrik ve Elektronik Malzeme Atığı, 2002/96/EC Kararnamesi altında 13 Ağustos 2005 tarihinden itibaren geçerli olmak üzere, elektrikli ve elektronik malzemeler diğer atıklar gibi çöpe atılamayacak ve bu elektonik cihazların üreticileri, cihazların kullanım süreleri bittikten sonra ürünleri geri toplamakla yükümlü olacaktır.
▍ Contents Copyright Notice �������������������������������������������������������������������������������������������������������ii Trademarks ��������������������������������������������������������������������������������������������������������������ii Revision History �������������������������������������������������������������������������������������������������������ii Smartphone Application ������������������������������������������������������������������������������������������iii Technical Supp
JFP1, JFP2: System Panel Connectors ������������������������������������������������������ 1-22 JUSB1~2: USB 2.0 Expansion Connectors ������������������������������������������������� 1-23 JUSB3: USB 3.0 Expansion Connector ������������������������������������������������������� 1-24 Preface JCI1: Chassis Intrusion Connector �������������������������������������������������������������� 1-24 JAUD1: Front Panel Audio Connector ��������������������������������������������������������� 1-25 M2_1: M.
Security �������������������������������������������������������������������������������������������������������� 3-16 Save & Exit �������������������������������������������������������������������������������������������������� 3-17 M-FLASH ����������������������������������������������������������������������������������������������������������� 3-24 OC PROFILE ����������������������������������������������������������������������������������������������������� 3-25 HARDWARE MONITOR ���������������������
Chapter 1 Getting Started Thank you for choosing the Z97 GUARD-PRO/ H97 GUARD-PRO Series (MS-7923 v1.X) ATX motherboard. The Z97 GUARD-PRO/ H97 GUARDPRO Series motherboards are based on Intel® Z97/ H97 chipset for optimal system efficiency. Designed to fit the advanced Intel® LGA1150 processor, the Z97 GUARD-PRO/ H97 GUARD-PRO Series motherboards deliver a high performance and professional desktop platform solution.
Packing Contents Motherboard Drivers & Utilities Disc Motherboard User Guide I/O Shield Chapter 1 SATA Cable Optional Accessories M-Connector * These pictures are for reference only and may vary without notice. * The packing contents may vary according to the model you purchased. * If you need to purchase the optional accessories or request part numbers, please visit the MSI website at http://www.msi.com/index.php or consult the dealer.
■ The components included in this package are prone to damage from electrostatic discharge (ESD). Please adhere to the following instructions to ensure successful computer assembly. ■ Always turn off the power supply and unplug the power cord from the power outlet before installing or removing any computer component. ■ Ensure that all components are securely connected. Loose connections may cause the computer to not recognize a component or fail to start.
Motherboard Specifications Chapter 1 CPU Support ■ Supports 4th and 5th Generation Intel® Core™ Processors, and Intel® Pentium® and Celeron® Processors for Socket LGA1150 Chipset ■ Intel® Z97/ H97 Express Chipset Memory Support ■ 4x DDR3 memory slots supporting up to 32GB ■ Z97 GUARD-PRO supports DDR3 3200(OC)/3100(OC)/ 3000(OC)/ 2800(OC)/ 2666(OC)/ 2600(OC)/ 2400(OC)/ 2200(OC)/ 2133(OC)/ 2000(OC)/ 1866(OC)/ 1600/ 1333/ 1066 MHz ■ H97 GUARD-PRO supports DDR3 1600/ 1333/ 1066 MHz ■ Dual channel memory
■ 1x PS/2 keyboard/ mouse port ■ 2x USB 2.0 ports ■ 4x USB 3.0 ports ■ 1x VGA port ■ 1x DVI-D port ■ 1x DisplayPort ■ 1x LAN (RJ45) port ■ 6x audio jacks Internal Connectors ■ 1x 24-pin ATX main power connector ■ 1x 8-pin ATX 12V power connector ■ 6x SATA 6Gb/s connectors ■ 2x USB 2.0 connectors (supports additional 4 USB 2.0 ports) ■ 1x USB 3.0 connector (supports additional 2 USB 3.
Chapter 1 Software ■ Drivers ■ MSI - Command Center - Live Update 6 - Smart Utilities - Super Charger - Fast Boot - Network Genie - ECO Center ■ 7-ZIP ■ Intel Extreme Tuning Utility ■ Norton Internet Security Solution ■ Small Business Advantage (for H97 GUARD-PRO) Form Factor ■ ATX Form Factor ■ 12 in. x 8.7 in. (30.5 cm x 22 cm) For the latest information about CPU, please visit http://www.msi.com/cpu-support/ For more information on compatible components, please visit http://www.msi.
Connectors Quick Guide DIMM3 DIMM2 DIMM1 DIMM4 CPU Socket Back Panel SYSFAN3 JPWR1 SYSFAN1 PCI_E1 JUSB3 PCI_E2 M2_1 JBAT SATA5 PCI_E3 SATA6 PCI_E4 SATA3_4 PCI_E5 SATA1_2 PCI_E6 JCI1 JFP1 JAUD1 JUSB1 JCOM1 JLPT1 JFP2 JUSB2 SYSFAN2 JTPM1 1-7 Getting Started Chapter 1 CPUFAN1 JPWR2
Connectors Reference Guide Port Name Port Type Page Chapter 1 Back Panel 1-9 CPU LGA1150 CPU Socket 1-11 CPUFAN1,SYSFAN1~3 Fan Power Connectors 1-21 DIMM1~4 Memory Slots 1-15 JAUD1 Front Panel Audio Connector 1-25 JBAT1 Clear CMOS Jumper 1-27 JCI1 Chassis Intrusion Connector 1-24 JCOM1 Serial Port Connector 1-26 JFP1, JFP2 System Panel Connectors 1-22 JLPT1 Parallel Port Connector 1-26 JPWR1~2 ATX Power Connectors 1-17 JTPM1 TPM Module Connector 1-26 JUSB1~2 USB 2.
Back Panel Quick Guide VGA port LAN Port Line-In Line-Out CS-Out DisplayPort Mic USB 2.0 Port USB 3.0 Port RS-Out USB 3.0 Port SS-Out DVI-D port ▶ PS/2 Keyboard/Mouse Combo Port A combination of PS/2® mouse/keyboard DIN connector for a PS/2® mouse/keyboard. ▶ USB 2.0 Port The USB 2.0 port is for attaching USB 2.0 devices such as keyboard, mouse, or other USB 2.0-compatible devices. ▶ USB 3.0 Port USB 3.0 port is backward-compatible with USB 2.0 devices.
Important This platform supports dual-display and triple-display function. DVI+DisplayPort DVI+VGA VGA+DisplayPort DVI+VGA+DisplayPort Extend mode (Extend the desktop to the second and third monitor) ◯ ◯ ◯ ◯ Clone mode (Monitors have the same screen) ◯ ◯ ◯ ◯ Chapter 1 ▶ Audio Ports These connectors are used for audio devices. The color of the jack refers to the function of the connector. ■ Blue-Line in: Used for connecting external audio outputting devices.
CPU (Central Processing Unit) Introduction to the LGA 1150 CPU The surface of the LGA 1150 CPU has two notches and a golden triangle to assist in correctly lining up the CPU for motherboard placement. The golden triangle is the Pin 1 indicator. Notch Chapter 1 Notch Golden triangle is the Pin 1 indicator Important Overheating Overheating can seriously damage the CPU and motherboard. Always make sure the cooling fans work properly to protect the CPU from overheating.
CPU & Heatsink Installation When installing a CPU, always remember to install a CPU heatsink. A CPU heatsink is necessary to prevent overheating and maintain system stability. Follow the steps below to ensure correct CPU and heatsink installation. Wrong installation can damage both the CPU and the motherboard. Video Demonstration Watch the video to learn how to install CPU & heatsink. http://youtu.be/bf5La099urI Chapter 1 1. Push the load lever down to unclip it and lift to the fully open position. 2.
3. Align the notches with the socket alignment keys. Lower the CPU straight down, without tilting or sliding the CPU in the socket. Inspect the CPU to check if it is properly seated in the socket. 4. Close and slide the load plate under the retention knob. Close and engage the load lever. Chapter 1 CPU notches Alignment Key Retention knob 5. When you press down the load lever the PnP cap will automatically pop up from the CPU socket. Do not discard the PnP cap.
7. Locate the CPU fan connector on the motherboard. 8. Place the heatsink on the motherboard with the fan’s cable facing towards the fan connector and the fasteners matching the holes on the motherboard. CPU fan connector Chapter 1 9. Push down the heatsink until the four fasteners get wedged into the holes on the motherboard. Press the four fasteners down to fasten the heatsink. As each fastener locks into position a click should be heard. 10.
Memory These DIMM slots are used for installing memory modules. Chapter 1 DIMM1 DIMM2 DIMM3 DIMM4 Video Demonstration Watch the video to learn how to install memories at the address below. http://youtu.be/76yLtJaKlCQ Dual-Channel mode Population Rule In Dual-Channel mode, the memory modules can transmit and receive data with two data bus channels simultaneously. Enabling Dual-Channel mode can enhance system performance. The following illustrations explain the population rules for Dual-Channel mode.
Mounting Screw Holes Chapter 1 The I/O ports should be facing toward the rear of the computer case. They should line up with the holes on the I/O backplate. When installing the motherboard, first install the necessary mounting stands required for an motherboard on the mounting plate in your computer case. If there is an I/O back plate that came with the computer case, please replace it with the I/O backplate that came with the motherboard package.
Power Supply Video Demonstration Watch the video to learn how to install power supply connectors. http://youtu.be/gkDYyR_83I4 JPWR1~2: ATX Power Connectors d n u d ro un nd .G ro u d 4 .G ro un 3 .G ro 2 .G 1 Chapter 1 These connectors allow you to connect an ATX power supply. To connect the ATX power supply, align the power supply cable with the connector and firmly press the cable into the connector. If done correctly, the clip on the power cable should be hooked on the motherboard’s power connector.
Expansion Slots This motherboard contains numerous slots for expansion cards, such as discrete graphics or audio cards. PCI_E1~6: PCIe Expansion Slots The PCIe slot supports the PCIe interface expansion card. PCIe 3.0 x16 Slot Chapter 1 PCIe 2.0 x4 Slot PCIe 2.0 x1 Slot Important When adding or removing expansion cards, always turn off the power supply and unplug the power supply power cable from the power outlet.
Video/ Graphics Cards If available, this motherboard takes advantage of the CPU’s integrate graphics processor, but discrete video cards can be installed by way of the motherboard’s expansion slots. Adding on one or more discrete video cards will significantly boost the system’s graphics performance. For best compatibility, MSI graphics cards are recommended. Watch the video to learn how to install a graphics card on PCIe x16 slot with butterfly lock. http://youtu.
Internal Connectors SATA1~6: SATA Connectors This connector is a high-speed SATA interface port. Each connector can connect to one SATA device. SATA devices include disk drives (HDD), solid state drives (SSD), and optical drives (CD/ DVD/ Blu-Ray). Video Demonstration Watch the video to learn how to Install SATA HDD. http://youtu.
CPUFAN1,SYSFAN1~3: Fan Power Connectors The fan power connectors support system cooling fans with +12V. If the motherboard has a System Hardware Monitor chipset on-board, you must use a specially designed fan with a speed sensor to take advantage of the CPU fan control. Remember to connect all system fans. Some system fans may not connect to the motherboard and will instead connect to the power supply directly. A system fan can be plugged into any available system fan connector. o d tr n n u ro 2V e Co .
JFP1, JFP2: System Panel Connectors These connectors connect to the front panel switches and LEDs. The JFP1 connector is compliant with the Intel® Front Panel I/O Connectivity Design Guide. When installing the front panel connectors, please use the optional M-Connector to simplify installation. Plug all the wires from the computer case into the M-Connector and then plug the M-Connector into the motherboard. Video Demonstration Watch the video to learn how to Install front panel connectors. http://youtu.
JUSB1~2: USB 2.0 Expansion Connectors This connector is designed for connecting high-speed USB peripherals such as USB HDDs, digital cameras, MP3 players, printers, modems, and many others. d C un + .N o 1 0 r B 1 .G S B1 8 U . S C 6 U . 4 VC . 2 Video Demonstration Watch the video to learn how to charge the smartphone with Super-Charge. http://youtu.be/FCyvjr5NbOw Important • Note that the VCC and GND pins must be connected correctly to avoid possible damage.
JUSB3: USB 3.0 Expansion Connector The USB 3.0 port is backwards compatible with USB 2.0 devices. It supports data transfer rates up to 5Gbits/s (SuperSpeed). N D _ DP in N P r X _ D o e _R X _ P C D .N w 3 R _ _ 0 o B _ 2 .P S B3 nd X _C T 9 1 8.U S ou _ X 1 7.U Gr B3 _T 1 6. S B3 nd 1 .U S u .0 + o 5 1 4.U r B2 .0 1 3.G S B2 1 2.U S 1 1.U 1 N D _ DP N r X _ D e R X _ P w _ o B3 _R _C _D .P S 3 d X C 1 .U SB un T _ 2 .U ro 3_ TX 3 .G SB 3_ d 4 .U B n 0 5 S u 2. 0 + .U ro 6 .G SB 2. nd 7 U B u . S 8 .
JAUD1: Front Panel Audio Connector This connector allows you to connect the front audio panel located on your computer case. This connector is compliant with the Intel® Front Panel I/O Connectivity Design Guide. ct te e D e n o n h io P ct d e a e in et .H P D 0 o 1 .N IC d 8 M n . C 6 .N ou 4 Gr . 2 io L e D n o N h E R P _S ne d o a E h e NS P .H E d 9 .S ea R 7 .H IC L 5 .M IC 3 .M 1 The M.2 port supports either M.2 SATA 6Gb/s module or M.2 PCIe module.
JTPM1: TPM Module Connector This connector connects to a TPM (Trusted Platform Module). Please refer to the TPM security platform manual for more details and usages. T C L Y .S 5 E S 2 3.P U K# 7 2 .B C ND 6 1 2 9.A R ND 5 1 .P R ND 4 7 1 5.P R ND 3 1 .P 3 R D 2 1 1.P RN D 1 1 .P N D 9 .P R N D0 7 .PR N B# 5 .PR ST 3 .R 1 in P d o un d .N ro un d 6 2 4.G ro un d 2 2.G ro un d 2 .G ro un d 0 2 .G r o u n d 8 # 1 6 . G r o u n d IN 1 .G ro un L 4 S 1 2.G ro _ # 1 .G PT IT 0 1 .L IN # 8 P R # . 6 ER D . 4 .
Jumpers JBAT1: Clear CMOS Jumper There is CMOS RAM onboard that is external powered from a battery located on the motherboard to save system configuration data. With the CMOS RAM, the system can automatically boot into the operating system (OS) every time it is turned on. If you want to clear the system configuration, set the jumpers to clear the CMOS RAM. 1 Chapter 1 1 Keep Data Clear Data Important You can clear the CMOS RAM by shorting this jumper while the system is off.
LED Status Indicators Chapter 1 MSI LED LED Status Table The following table describes the status of LED indicators.
Drivers and Utilities After you install the operating system you will need to install drivers to maximize the performance of the new computer you just built. MSI motherboard comes with a Driver Disc. Drivers allow the computer to utilize your motherboard more efficiently and take advantage of any special features we provide. You can protect your computer from viruses by installing the bundled security program. The bundle also includes a variety of powerful and creative utilities.
Chapter 2 Quick Installation This chapter provides demonstration diagrams about how to install your computer. Some of the installations also provide video demonstrations. Please link to the URL to watch it with the web browser on your phone or tablet. You may have even link to the URL by scanning the QR code. Important The diagrams in this chapter are for reference only and may vary from the product you purchased.
CPU Installation http://youtu.
7 Chapter 2 8 9 2-3 Quick Installation
Memory Installation http://youtu.
Motherboard Installation Chapter 2 1 2 2-5 Quick Installation
3 Chapter 2 Quick Installation 2-6
Power Connectors Installation 1 http://youtu.
3 88 E6 SI M C4 M 88 E6 SI M C4 M 88 E6 SI M C4 M Chapter 2 Quick Installation 2-8
SATA HDD Installation http://youtu.
M.2 module Installation 1 2 3 Chapter 2 4.
Front Panel Connector Installation JFP1 Connector Installation 8 E68 MSI MC4 8 E68 MSI MC4 88 E6 I MS 4 MC 88 E6 I MS 4 MC POWER SW POWER LED REST SW 88 E6 I MS 4 MC Front Panel Audio Connector Installation 88 E6 SI M C4 M 88 E6 SI M C4 M 88 E6 SI M C4 M 8 E68 MSI MC4 8 E68 MSI MC4 8 E68 MSI MC4 8 E68 MSI MC4 88 E6 SI M C4 M 2-11 Quick Installation Chapter 2 8 E68 MSI MC4 PWR_SWPWR_SW+ FP PWR/SLP FP PWR/SLP HD_LED+ HD_LEDRST_SWRST_SW+ RSVD_DNU 88 E6 I MS 4 MC 8 E68 MSI MC4 HD_LED+ HD_
Peripheral Connector Installation USB2.0 Connector Installation or US B US 88 E6 SI M C4 M 88 E6 SI M C4 M Chapter 2 8 8 E68 MSI MC4 8 E68 MSI MC4 8 E68 MSI MC4 E68 MSI MC4 8 E68 MSI MC4 8 E68 MSI MC4 8 E68 MSI MC4 8 E68 MSI MC4 8 E68 MSI MC4 8 E68 MSI MC4 8 E68 MSI MC4 8 E68 MSI MC4 88 E6 SI M C4 M 88 E6 SI M C4 M USB3.
Graphics Card Installation http://youtu.
3 4 Chapter 2 5 Quick Installation 2-14
Chapter 3 BIOS Setup CLICK BIOS is a revolutionary UEFI interface that allows you to setup and configure your system for optimum use. Using your mouse and keyboard, users can change BIOS settings, monitor CPU temperature, select the boot device priority and view system information such as the CPU name, DRAM capacity, the OS version and the BIOS version. Users can import and export parameter data for backup or for sharing with friends.
Entering Setup The default settings offer the optimal performance for system stability in normal conditions. You may need to run the Setup program when: ■ An error message appears on the screen during the system booting up, and requests you to run SETUP. ■ You want to change the default settings for customized features. Important • Please clear the CMOS data and restore the default settings if the system becomes unbootable after changing BIOS settings.
Overview After entering BIOS, the following screen is displayed. Temperature monitor My Favorites Language System information Boot device priority bar Virtual OC Genie Button BIOS menu selection BIOS menu selection ▶ BIOS menu selection The following options are available: ■ SETTINGS - Uses this menu to specify the parameters for chipset and boot devices. ■ OC - This menu contains the frequency and voltage adjustments.
▶ Virtual OC Genie Button Enables or disables the OC Genie function by clicking on this button. When enabled, this button will be light. Enabling OC Genie function can automatically overclock with MSI optimized overclocking profile. Important We recommend that you do not to make any modification in OC menu mode and do not to load defaults after enabling the OC Genie function. ▶ Menu display This area provides BIOS setting items and information to be configured.
Adding BIOS item to Favorite 1~5 1. Move the mouse cursor to highlight a BIOS setting item. 2. Right-click (or press "F2" key) and then choose a favorite menu (Favorite 1~5) to add the BIOS item. Choose a favorite menu to add the BIOS item Deleting BIOS item from Favorite 1~5 1. Move the mouse cursor to highlight a BIOS item in the Favorite 1~5 menu. 2. Right-click (or press "F2" key) and then click "Delete" to delete the BIOS item.
Operation You can control BIOS settings with the mouse and the keyboard. The following table lists and describes the hot keys and the mouse operations. Hot key Mouse <↑↓→← > Description Select Item .
Updating BIOS Updating the BIOS with M-FLASH ▶ Before updating Please download the latest BIOS file that matches your motherboard model from MSI website. And then save the BIOS file into the USB flash disk. Important Only the FAT32/ NTFS format USB flash disk supports updating BIOS by M-FLASH. ▶ Updating BIOS 1. Insert the USB flash disk that contains the BIOS update file into the computer. 2. Restart the system, and then press "Del" key to enter the BIOS Setup during POST. 3.
SETTINGS System Status ▶ System Date Sets the system date. Use tab key to switch between date elements. The format is . Day of the week, from Sun to Sat, determined by BIOS. Read-only. The month from Jan. through Dec. The date from 1 to 31 can be keyed by numeric function keys. The year can be adjusted by users. ▶ System Time Sets the system time. Use tab key to switch between time elements. The time format is .
Advanced ▶ PCI Subsystem Settings Sets PCI, PCI express interface protocol and latency timer. Press to enter the sub-menu. ▶ PEGX - Gen X [Auto] Sets PCI Express protocol for matching different installed devices. [Auto] Enables all PCIe Gen1, Gen2 and Gen3. supports. [Gen1] Enables PCIe Gen1 support only. [Gen2] Enables PCIe Gen2 support only. [Gen3] Enables PCIe Gen3 support only. ▶ PCI Latency Timer [32] Sets latency timer of PCI interface device.
▶ Ipv6 PXE Support [Enabled] When “Enabled”, the system UEFI network stack will support Ipv6 protocol. This item will appear when “Network Stack” is enabled. [Enabled] Enables the Ipv6 PXE boot support. [Disabled] Disables the Ipv6 PXE boot support. ▶ SATA Mode [AHCI Mode] Sets the operation mode of the onboard SATA controller. [Disabled] Disables the SATA function. [IDE Mode] Specify the IDE mode for SATA storage devices. [AHCI Mode] Specify the AHCI mode for SATA storage devices.
▶ IGD Multi-Monitor [Disabled] Enables or disables the multi-screen output from integrated graphics and external graphics card. [Enabled] Enables IGD multi-screen function. [Disabled] Disables IGD multi-screen function. ▶ Intel(R) Rapid Start Technology Sets Intel® Rapid Start Technology for optimizing the system resume operation. Press to enter the sub-menu. ▶ Intel(R) Rapid Start Technology [Disabled] Intel® Rapid Start Technology lets the system resume from sleep mode quickly.
▶ RapidStart Display Type [BIOS Save/Restore] Selects the screen type of Intel Rapid Start Display. [BIOS Save/Restore] The BIOS POST splash screen will be saved/ restored. [DeskTop Save/Restore] The desktop image will be saved/ restored. ▶ LakeTiny Feature [Disabled] Enables or disables Intel Lake Tiny feature with iRST for SSD. This item appears when a installed CPU supports this function and "Intel C-State" is enabled.
▶ Parallel (LPT) Port Settings [Auto] Sets parallel port (LPT). If set to "Auto", BIOS will optimize the IRQ automatically or you can set it manually. ▶ Device Mode [Printer Mode] Selects an operating mode for parallel port. [Printer Mode] Printer port mode [SPP] Standard Parallel Port mode [EPP-1.9/ 1.7 + SPP] Enhanced Parallel Port-1.9/ 1.7 mode + Standard Parallel Port mode. [ECP] Extended Capability Port mode [ECP + EPP-1.9/ 1.
▶ Windows 8/ 8.1 Configuration Sets Windows 8/ 8.1 detailed configuration and behaviors. Press to enter the sub-menu. ▶ Windows 8/ 8.1 Feature [Disabled] Enables the supports for Windows 8/ 8.1 or disables for other operating systems. Before enabling this item, make sure all installed devices & utilities (hardware & software) should meet the Windows 8/ 8.1 requirements. [Enabled] The system will switch to UEFI mode to meet the Windows 8/ 8.1 requirement. [Disabled] Disables this function.
▶ Key Management Manages the secure boot keys. Press to enter the sub-menu. This submenu will appear when “Secure Boot Mode” sets to [Custom]. ▶ Wake Up Event Setup Sets system wake up behaviors for different sleep modes. Press to enter the sub-menu. ▶ Wake Up Event By [BIOS] Selects the wake up event by BIOS or operating system. [BIOS] Activates the following items, and use these items to set the wake up events. [OS] The wake up events will be defined by OS.
▶ Resume From S3/S4/S5 by PS/2 Keyboard [Disabled] Disables or enables the system wake up by PS/2 keyboard. [Any Key] Enables the system to be awakened from S3/ S4/ S5 state when activity of any key on PS/2 keyboard is detected. [Hot Key] Enables the system to be awakened from S3/ S4/ S5 state when activity of hot key on PS/2 keyboard is detected. [Disabled] Disables this function. Boot Sets the sequence of system boot devices.
confirm the password. You may also press to abort the selection. To clear a set password, press when you are prompted to enter a new password. A message will confirm the password is being disabled. Once the password is disabled, you can enter the setup and OS without authorization. ▶ Trusted Computing Sets TPM (Trusted Platform Module) function. ▶ TPM SUPPORT [Disabled] Enables or disables the TPM function to build the endorsement key for accessing the system.
OC Important • Overclocking your PC manually is only recommended for advanced users. • Overclocking is not guaranteed, and if done improperly, can void your warranty or severely damage your hardware. • If you are unfamiliar with overclocking, we advise you to use OC Genie for easy overclocking. ▶ Simple/Advanced Mode [Simple] Enables or disables the advanced OC settings in BIOS. [Simple] Provides the regular OC settings in BIOS setup.
[Enabled] [Disabled] Enables this function to boost CPU performance automatically above rated specifications when system request the highest performance state. Disables this function. ▶ Legacy Tweaking [Disabled]* Enables or disabled to improve performance for legacy benchmarking application like 3DMark 01. [Enabled] Enables this function for improving 3DMark 01 performance. [Disabled] Disables this function. ▶ Adjust Ring Ratio [Auto] Sets the ring ratio.
[UnLink] Allows user to configure the DRAM timing manually for respective memory channel. ▶ Advanced DRAM Configuration Press to enter the sub-menu. This sub-menu will be activated after setting [Link] or [Unlink] in “DRAM Timing Mode”. User can set the memory timing for each memory channel. The system may become unstable or unbootable after changing memory timing. If it occurs, please clear the CMOS data and restore the default settings.
▶ CPU Core Voltage/ CPU Ring Voltage/ CPU GT Voltage [Auto] Sets the CPU Core/ Ring/ GT voltages. If set to "Auto", BIOS will set these voltages automatically or you can set it manually. ▶ CPU SA Voltage/ CPU IO Analog Voltage/ CPU IO Digital Voltage [Auto] Sets the CPU SA/ IO Analog/ IO Digital voltages. If set to "Auto", BIOS will set these voltages automatically or you can set it manually. This item appears when "CPU SA/ IOA/IOD Voltage Mode" sets to [Manual Mode].
▶ Execute Disable Bit [Enabled] Intel’s Execute Disable Bit functionality can prevent certain classes of malicious “buffer overflow” attacks where worms attempt to execute code to damage the system. It is recommended that keeps this item enabled always. [Enabled] Enables NO-Execution protection to prevent the malicious attacks and worms. [Disabled] Disables this function. ▶ Intel Virtualization Tech [Enabled] Enables or disables Intel Virtualization technology.
[Disabled] Disables this function. ▶ Package C State limit [Auto] This item allows you to select a CPU C-state mode for power-saving when system is idle. This item appears when "Intel C-State" is enabled. [Auto] This setting will be configured automatically by BIOS. [C0~C7s] The power-saving level from high to low is C7s, C7, C6, C3, C2, then C0. ▶ LakeTiny Feature [Disabled] Enables or disables Intel Lake Tiny feature with iRST for SSD.
M-FLASH Important M-Flash funcion allows you to update BIOS from USB flash disk (FAT32/ NTFS format only), or allows the system to boot from the BIOS file inside USB flash disk (FAT/ FAT32 format only). ▶ BIOS Boot Function [Disabled] Enables or disables the system to boot form USB flash disk with BIOS file. [Enabled] Enables the system to boot from the BIOS within USB flash disk. [Disabled] Enables the system to boot from the BIOS within ROM on motherboard.
OC PROFILE ▶ Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6 Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6 management. Press to enter the submenu. ▶ Set Name for Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6 Names the current overclocking profile. ▶ Save Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6 Saves the current overclocking profile. ▶ Load Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6 Loads the current overclocking profile. ▶ Clear Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6 Clears the current overclocking profile.
HARDWARE MONITOR Current Temperature & Speed information Fan control field Setting Buttons Voltage display ▶ Current Temperature & Speed information Shows the current CPU temperature, system temperature and fans' speeds. Chapter 3 ▶ Fan control field This motherboard provides a fan speed control feature call “Smart Fan Mode”. Please check the “Smart Fan Mode” to enable the Smart Fan Mode.
Appendix A Realtek Audio The Realtek audio provides 10-channel DAC that simultaneously supports 7.1 sound playback and 2 channels of independent stereo sound output (multiple streaming) through the Front-Out-Left and Front-Out-Right channels.
Software Configuration Appendix A After installing the audio driver (see Chapter 1 - Driver and Utilities), the “Realtek HD Audio Manager” icon will appear at the notification area (lower right of the screen). You may double click the icon and the GUI will pop up accordingly. double click the icon It is also available to enable the audio driver by clicking the Realtek HD Audio Manager from the Control Panel.
▶ Volume Adjustment You can control the volume or balance the right/left side of the speakers that you plugged in front or rear panel by adjust the bar. ▶ Application Enhancement The array of options will provide you a complete guidance of anticipated sound effect for both output and input device. ▶ Jack status panel This panel depicts all render and capture devices currently connected with your computer.
Hardware Default Setting The following diagrams are audio back panel default setting.
Backpanel audio jacks to 6-channel speakers diagram Fro nt Cen ■ ter &S ubw Rea oof r er Backpanel audio jacks to 8-channel speakers diagram Fro nt Cen ter S id A-5 &S eS ubw urro Rea oof r er und Realtek Audio Appendix A ■
Appendix B Intel RAID This appendix will assist users in configuring and enabling RAID functionality and accelerating system on platforms
Introduction The motherboard comes with the Intel RAID controller that allows you to configure SATA hard drives as RAID sets. SATA hard drives deliver blistering transfer speeds up to 6 Gb/s. Serial ATA uses long, thin cables, making it easier to connect your drive and improving the airflow inside your PC. The most outstanding features are: 1. Supports 3 Gb/s or 6 Gb/s transfers with CRC error checking. 2. Supports Hot-plug-n-play feature. 3.
Using Intel Rapid Storage Technology Option ROM Creating, Deleting and Resetting RAID Volumes: The Serial ATA RAID volume may be configured using the RAID Configuration utility stored within the Intel RAID Option ROM. During the Power-On Self Test (POST), the following message will appear for a few seconds. Important The “Device Model”, “Serial #” and “Size” in the following example might be different from your system. RAID Volumes None defined.
After pressing the and keys simultaneously, the following window will appear: [ [ MAIN MAIN MENU ] ] 1. 2. 3. 4. Recovery Volume Options Create RAID Volume 5. Acceleration Options Delete RAID Volume 6. Exit Reset Disks to Non-RAID [ DISK / VOLUME INFORMATION ] RAID Volumes : None defined. Appendix B Physical Devices : Port Device Model 1 XXXX-XXXXXXXX 2 XXXX-XXXXXXXX [ ↑↓] - Select Serial # XXXXXXXXXXXXXX XXXXXXXXXXXXXX [ESC] - Exit Size Type/Status (Vol ID) XXX.XGB Non-RAID Disk XXX.
3. In the Disk field, press key and use key to select the disks you want to create for the RAID volume, then click key to finish selection. This field will become available according to the selected RAID level. 4. Then select the strip size for the RAID array by using the “upper arrow” or “down arrow” keys to scroll through the available values, and pressing the key to select and advance to the next field.
6. Go to the Create Volume field and press , the following screen appears for you to confirm if you are sure to create the RAID volume. Press to continue. [ CREATE VOLUME MENU ] Name : RAID Level : Disks : Strip Size : Capacity : Sync : Volume0 RAID1(Mirror) Select Disks N/A XXX.X GB N/A Create Volume WARNING : ALL DATA ON SELECTED DISKS WILL BE LOST. HELP [ Are you sure you want to create] this volume? (Y / N) : Appendix B Press ENTER to create the specified volume.
■ Delete RAID Volume Here you can delete the RAID volume, but please be noted that all data on RAID drives will be lost. Important Select option 2 Delete RAID Volume from the main menu screen and press key to select a RAID volume for deletion. Then press key to delete the selected RAID volume. The following screen appears. [ DELETE VOLUME MENU ] Name Volume0 Level RAID1(Mirror) Drives 2 Capacity XXX.
■ Reset Disks to Non-RAID Select option 3 Reset Disks to Non-RAID and press to delete the RAID volume and remove any RAID structures from the drives. The following screen appears: [ MAIN MENU ] 4. Recovery Volume Options Create RAID Volume 4. ] Recovery Volume Options Delete RAID Volume [ RESET RAID DATA 5. remove Exit its RAID structures Resetting RAID disk will VOLUME INFORMATION and revert [ it DISK to a / non-RAID disk. ] 1. 2.
■ Recovery Volume Options Select option 4 Recovery Volume Options and press to change recovery volume mode. The following screen appears: [ RECOVERY VOLUME OPTIONS ] 1. 2. Enable Only Recovery Disk Enable Only Master Disk [ HELP ] [ ↑↓] - select [ESC] - Previous Menu Appendix B Enable Only Recovery Disk - enables recovery disk if available and disables master disk. Enable Only Master Disk - enables master disk if available and disables recovery disk.
Degraded RAID Array A RAID 1, RAID 5 or RAID 10 volume is reported as degraded when one of its hard drive members fails or is temporarily disconnected, and data mirroring is lost. As a result, the system can only utilize the remaining functional hard drive member. To re-establish data mirroring and restore data redundancy, refer to the procedure below that corresponds to the current situation. Missing Hard Drive Member 1. Make sure the system is powered off. 2. Reconnect the hard drive. 3.
5. Exit Intel RAID Option ROM, and then reboot to Windows system. 6. When prompted to rebuild the RAID volume, click ‘Yes’. Appendix B 7. The Intel Rapid Storage Technology application will be launched. Right-click the new hard drive and select ‘Rebuild to this Disk’. The ‘Rebuild Wizard’ will be launched which will guide you through the process of rebuilding to the new hard drive.
System Acceleration (optional) Intel® Rapid Storage Technology use a SSD as a cache. Which can store frequently used data without having to use a slow virtual disk or depend on RAM. The SSD cache with the advantages of high-speed read/write and non-volatile memory to accelerate the system performance. Important Check your SSD manufacturer's website, upgrade firmware in order to support Intel® Rapid Storage Technology. Appendix B Intel® Rapid Storage Technology can only work with RAID mode.
9. Run Intel Rapid Storage Technology application. 10. Click "Enable acceleration" under Accelerate tab. Click here Appendix B 11. Select the acceleration options. 12. Click OK and reboot the system. The page refreshes and reports the new acceleration configuration in the Acceleration View. Important You can click “More help on this page” or "More help" of the Intel® Rapid Storage Technology application to view more information.
RST Synchronization (optional) If you are using Maximized mode as the Acceleration mode, the data on the hard disk is not always synchronized with the data in the SSD cache. In some situations, you may want to manually sync the disks for avoiding data loss. Follow these steps to sync manually. 1. Reboot system, during the Power-On Self Test (POST) press, press and keys simultaneously to enter the Intel Rapid Storage Technology Option ROM. 2.
Appendix C Intel SBA (optional) Intel® Small Business Advantage (Intel® SBA) provides an out-of-the-box hardware-based security and productivity suite designed for the small business user. Intel SBA includes a customizable user interface and several bundled Intel applications.
Prerequisites Appendix C ■ Supported Operating Systems Intel SBA supports following OS: ■ Windows 7 32bit/ 64bit ■ Windows 8 32bit/ 64bit ■ Windows 8.1 32bit/ 64bit ■ Required User Permissions You must run the installer and the customization wizard with a user that has local administrator permissions on the computer. ■ Windows Update Settings In certain conditions, the Windows Update task in the PC Health Center application is disabled and cannot be enabled.
Installing Intel SBA This procedure describes how to install Intel SBA. ■ To install Intel SBA: 1. Logon to the computer with a user that has administrator privileges. 2. Insert the application DVD into the DVD-ROM drive. The setup screen will automatically appear. 3. Click OTHERS tab. 4. Select Intel SBA to start installing. 5. Follow the on-screen instructions to install. Software Configuration After installation of the Intel SBA software is complete, the Intel SBA service is started.
Password settings By default, the system is in an unconfigured state. Before the hardware capabilities can be used by Intel SBA software, the system must be configured. This is done in the Settings > Password Settings tab in the main menu of the GUI. Appendix C Fill out the form to create the new password and click “Save”. You will be asked to enter the password when you want to start using Intel SBA. Important • Upon completion of the password settings, please keep your password secure.
