Instruction manual

3-2
Chapter 3
Entering Setup
Turn on the computer. When the below message appears briefly at
the bottom of the screen during the POST (Power On Self Test), press <Delete>
key or simultaneously press <Ctrl>, <Alt> and <Esc> to enter the SETUP
program.
If the message disappears before you respond and you still want to
enter SETUP, restart the system by turning off then on the power or pressing
the Reset button to try again. You may also restart by simultaneously press-
ing <Ctrl>, <Alt>, and <Delete> keys.
TO ENTER SETUP BEFORE BOOT, PRESS <CTRL-ALT-
ESC>
Control Keys
After entering the BIOS setup program, you can use the keyboard to
navigate through the setup menus and change the settings. A brief descrip-
tion of keyboard usage is listed below:
Page
Down
Page
Up
+
Move to the previous/next item
Move to the item in the left/right hand
Select the item
Increase/decrease the numeric value or make changes
Jump to the Exit menu or return to the Main menu from a sub-menu
General help
F10
F7
Esc
F5
F1
Enter
Restore the previous CMOS value from CMOS
Load BIOS Setup defaults
Save all the CMOS changes and exit
Key(s) Function