Instruction manual

3-7
AWARD BIOS Setup
IDE Primary/Secondary Master/Slave
Press PgUp/<+> or PgDn/<-> to select the hard disk drive category. The
specification of hard disk drive will show on the right hand according to your
selection. You can press <Enter> to enter the sub-menu. The sub-menu will
appear as the following example:
Access Mode The settings are CHS,LBA, Large, and Auto
Capacity The formatted size of the storage device
Cylinder Number of cylinders
Head Number of heads
Precomp Write precompensation
Landing Zone Cylinder location of the landing zone
Sector Number of sectors
Drive A/B
The two items allow you to set the type of floppy drivers installed. Available
options are [None], [360K, 5.25 in], [1.2M, 5.25 in], [720k, 3.5 in], [1.44M, 3.
5in], and [2.88M, 3.5in].
Video
This item allows you to set the type of video card. Available options are
[EGA/VGA], [CGA40], [CGA80], and [MONO].