Instruction manual

3-17
AWARD BIOS Setup
Onboard FDC Controller
Select Enabled if your system has a floppy disk controller (FDD) in-
stalled on the system board and you wish to use it. If you install add-
on FDC or the system has no floppy drive, select Disabled in this field.
Available options are [Enabled] and [Disabled].
Onboard Serial Port 1/Onboard Serial Port 2
Select an address and corresponding interrupt for the first and second
serial ports. Available options are [3F8/IRQ4], [2E8/IRQ3], [3E8/IRQ4],
[2F8/IRQ3], [Disabled], and [Auto].
UART Mode Select
This item allows you to determine which InfraRed(IR) function of the
onboard I/O chip, this functions uses.
RxD, TxD Active
This item allows you to determine the active of RxD, TxD. Available
options are [Hi,Hi], [Lo,Lo], [Lo,Hi], and [Hi,Lo].
IR Transmission Delay
This item allows you to enable/disable the IR transmission delay.
Available options are [Enabled] and [Disabled].
Onboard SuperIO Device
Press <Enter> to enter the sub-menu, which contains the following items for
advanced control: