Instruction manual

3-19
AWARD BIOS Setup
OnChip USB
Select [Enabled] if your system contains a Universal Serial Bus (USB) con-
troller and you have USB peripherals. Available options are [Enabled] and
[Disabled].
USB Keyboard Support
Select [Enabled] if your system contains a Universal Serial Bus (USB) con-
troller and you have a USB keyboard. Available options are [Enabled] and
[Disabled].
BIOS Protect
This function protects the BIOS from accidental corruption by unauthorized
users or computer viruses. When set to [Enabled], the BIOS data cannot be
changed when attempting to update the BIOS with a Flash utility. To suc-
cessfully update the BIOS, you’ll need to disable this BIOS protection
function.
IDE HDD Block Mode
Block mode is also called block transfer, multiple commands, or multiple sec-
tor read/write. If your IDE hard drive supports block mode (most new drives
do), select Enabled for automatic detection of the optimal number of block
read/writes per sector the drive can support. Available options are [Enabled]
and [Disabled].
POWER ON Function
This controls how the PS/2 mouse or keyboard can power on the system.
Available settings are [Password], [Hot KEY], [Mouse Left], [Mouse Right],
[BUTTON ONLY] and [Keyboard 98].
KB Power ON Password
If POWER ON Function is set to [Password], then you can set a password in
the field for the PS/2 keyboard to power on the system.
Hot Key Power ON
If POWER ON Function is set to [Hot KEY], you can assign a hot key combi-
nation in the field for the PS/2 keyboard to power on the system. Settings:
[Ctrl-F1] through [Ctrl-F12].