Instruction manual

3-23
AWARD BIOS Setup
IRQ3 ~ IRQ15 enable or disable the monitoring of the specified
IRQ line. If set to [Enabled], the activity of the specified IRQ line
will prevent the system from entering power saving modes or
awaken it from power saving modes.
Note: IRQ (Interrupt Request) lines are system re-
sources allocated to I/O devices. When an I/O device needs
to gain attention of the operating system, it signals this by
causing an IRQ to occur. After receiving the signal, when the
operating system is ready, the system will interrupt itself and
perform the service required by the I/O device.
Power Status LED
This item sets how the system uses Power LED on the case to indicate the
suspend state. Settings are:
Single The Power LED remains the same color.
Dual The Power LED changes its color to indicate the
suspend state.