Instruction manual

3-15
BIOS Setup
Power Management Features
IPCA Function
This item is to activate the ACPI (Advanced Configuration and Power Man-
agement Interface) function. If your operating system is ACPI-aware, such as
Windows 98SE/2000/ME, select Yes.
ACPI Standby State
This item specifies the power saving modes for ACPI function. If your oper-
ating system supports ACPI, such as Windows 98SE, Windows ME and Win-
dows 2000, you can choose to enter the Standby mode in S1(POS) or S3
(STR) fashion through the setting of this field.
Call VGA at S3 Resuming
Selecting Enabled allows BIOS to call VGA BIOS to initialize the VGA card
when system wakes up (resumes) from S3 sleep state. The system resume
time is shortened when you disable the function, but system will need an AGP
driver to initialize the VGA card. Therefore, if the AGP driver of the card
does not support the initialization feature, the display may work abnormally
or not function after resuming from S3.
MSI Reminds You...
S3-related functions described in this section are available only
when your BIOS supports S3 sleep mode.