Instruction manual

3-17
BIOS Setup
interrupt occurs. Setting to Last State will restore the system to the previous
status before power failure or interrupt occurred.
Set WakeUp Events
Press <Enter> and the following sub-menu appears.
Wake Up On PME, Resume On KBC (with “Wake-Up Key” and
“Wake-Up Password”), Resume On PS/2 Mouse
These fields specify whether the system will be awakened from power
saving modes when activity or input signal of the specified hardware
peripheral or component is detected.
Resume By Alarm
This is used to enable or disable the feature of booting up the system on
a scheduled time/date from the soft off (S5) state.
Alarm Date/Hour/Minute/Second
If Resume By Alarm is set to Enabled, the system will automatically re-
sume (boot up) on a specific date/hour/minute/second specified here.
MSI Reminds You...
1. For “Wake-Up Key” function, the option “Specific Key” refers
to the password you specify in the “Wake-Up Password” field. Once
you set up a password, it will disable “Resume on PS/2 Mouse”.
2. For “Resume On PS/2 Mouse” function, you need to left-click
the mouse to power on the system if the function is enabled.