Instruction manual

3-20
MS-6593 ATX Mainboard
Parallel Port DMA
This feature needs to be configured only when Parallel Port Mode is set
to the ECP mode.
OnBoard Midi Port
The field specifies the base I/O port address for the onboard Midi Port.
Midi IRQ Select
The item is used to select the IRQ line for onboard Midi port.
OnBoard Game Port
This item is used to specify the address for the onboard game port.
OnBoard IDE
This setting controls the onboard IDE controller.
AC’97 Audio
The item is used to enable or disable the onboard AC’97 (Audio Codec’97)
controller.
USB Controller
This setting is used to enable/disable the onboard USB ports.
USB Legacy Support
Set to All Device if you need to use any USB device in the operating
system that does not support or have any USB driver installed, such as
DOS and SCO Unix. Set to No Mice only if you want to use any USB
device other than the USB mouse.
Port 64/60 Emulation
This field controls the USB Port 64/60 Emulation function. When the
function is enabled, the USB keyboard is allowed to type some special
combination keys.