Instruction manual

2-17

Hardware Setup

Front USB Connectors: JUSB1, JUSB2, JUSB3

The mainboard provides three standard USB 2.0 pin headers. USB 2.0

technology increases data transfer rate up to a maximum throughput of 480Mbps,

which is 40 times faster than USB 1.1, and is ideal for connecting high-speed USB

interface peripherals such as USB HDD, digital cameras, MP3 players, printers,

modems and the like.

PIN SIGNAL PIN SIGNAL

1 VCC 2 VCC

3 USB0- 4 USB1-

5 USB0+ 6 USB1+

7 GND 8 GND

9 Key (no pin) 10 USBOC

Pin Definition

MSI Reminds You...

Note that the pins of VCC and GND must be connected correctly to

avoid possible damage.

Connect to JUSB1, JUSB2, or

JUSB3

USB 2.0 Bracket

(Optional)

Chassis Intrusion Switch Connector: JCI1

This connector is connected to a 2-pin chassis switch. If the chassis is opened,

the switch will be short. The system will record this status and show a warning

message on the screen. To clear the warning, you must enter the BIOS utility and

clear the record.

JUSB1/2/3

(USB 2.0)

1 9

2 10

JCI1

GND

CINTRU