Instruction manual

3-18
MS-7207 M-ATX Mainboard
Power Button Function
This feature allows users to configure the Power Button function. Settings are:
[On/Off] The power button functions as a normal power-on/-off
button.
[Suspend] When you press the power button, the computer enters
the suspend/sleep mode, but if the button is pressed for
more than four seconds, the computer is turned off.
Restore on AC Power Loss
This setting specifies whether your system will reboot after a power failure or
interrupt occurs. Available settings are:
[Off] Leaves the computer in the power off state.
[On] Leaves the computer in the power on state.
[Last State] Restores the system to the previous status before power
failure or interrupt occurred.
Wakeup Event Setup
Press <Enter> to enter sub-menu and the following screen appears.
Force Throttle
Enable this item will decrease the frequency of the CPU when the CPU is overheat.
Setting options: [Disabled], [Enabled].
Manual Throttle Ratio
The item specifies the percentage of descreasing. Setting options: [87.5%],
[75%], [62.5%], [50%], [37.5%], [25%], [12.5%].
System Thermal
Enable this item will decrease the frequency of the CPU when the system is
overheat. Setting options: [Disabled], [Enabled].
Thermal throttle Ratio
The item specifies the percentage of descreasing. Setting options: [87.5%],
[75%], [62.5%], [50%], [37.5%], [25%], [12.5%].