Instruction manual

3-19
BIOS Setup
PS/2 Device Wakeup from S5
This controls how and whether the PS/2 keyboard is able to power on the
system from S5. If you choose [Password], you must type the password to
power on the system. The S3 wakeup function can be set up from Windows.
Settings: [Disabled], [Enabled].
Specific Key for PowerOn
If PS/2 Device Wakeup is set to [Enabled], then you can set a key in the field for
the PS/2 keyboard to power on the system.
Resume by MAC LAN
An input signal from the LAN awakens the system from a soft off state. Setting
options: [Disabled], [Enabled].
Resume by PCI Device (PME#)
When setting to [Enabled], this setting allows your system to be awakened from
the power saving modes through any event on PME (Power Management Event).
Setting options: [Disabled], [Enabled].
Resume by RTC Alarm
This is used to enable or disable the feature of booting up the system on a
scheduled time/date from the S3, S4, and S5 state. Setting options: [Disabled],
[Enabled].