User`s manual

3-9
BIOS Setup
Quick Boot
Setting the item to [Enabled] allows the system to boot within 10 seconds since it will
skip some check items.
Full Screen LOGO Display
This item enables you to show the company logo on the bootup screen. Settings are:
[Enabled] Shows a still image (logo) on the full screen at boot.
[Disabled] Shows the POST messages at boot.
Boot Sector Protection
This item allows you to choose the virus warning feature for IDE Hard Disk boot
sector protection. If this function is enabled and someone attempt to write date into
this area, BIOS will shows a warning message on screen and alarm beep.
Boot to OS/2
This allows you to run the OS/2 operatiing system with DRAM larger than 64MB.
When you choose No, you cannot run the OS/2 operating system with DRAM larger
than 64MB. But it is possible if you choose Yes.
Boot Up Num Lock LED
This setting is to set the Num Lock status when the system is powered on. Setting to
[On] will turn on the Num Lock key when the system is powered on. Setting to [Off]
will allow users to use the arrow keys on the numeric keypad.
Advanced BIOS Features