User`s manual

3-23
BIOS Setup
CPU Frequency Configuration
Press <Enter> to enter the sub-menu and the following screen appears.
Adjust CPU Ratio
This item allows you to set the CPU ratio.
CPU Voltage
This item allows you to set the CPU voltage.
Memclock Mode
Setting to Auto, the system will auto detect the memory clock. Setting to Manual, the
“Memory Value” item will appear and allows you to select the memory clock.
Memory Value
This item allows you to select the memory clock.
Adjust DDR Voltage (V)
Adjusting the DDR2 voltage can increase the DDR speed.
Memory Configuration
Press <Enter> to enter the sub-menu and the following screen appears.
MCT Timing Mode
This field has the capacity to automatically detect all of the DRAM timing. If you
set this field to [Manual], the following fields will be selectable.
CAS# Latency (TCL)
When the MCT Timing Mode sets to [Manual], the field is adjustable.This
controls the CAS latency, which determines the timing delay (in clock cycles)
before SDRAM starts a read command after receiving it.