Instruction manual

3-21
BIOS Setup
saving modes when activity or input signal of the specified hardware
peripheral or component is detected. Settings: Enabled, Disabled.
Resume By Alarm
This is used to enable or disable the feature of booting up the system on
a scheduled time/date from the soft off (S5) state. Settings: Enabled,
Disabled.
Alarm Date/Hour/Minute/Second
If Resume By Alarm is set to Enabled, the system will automatically re-
sume (boot up) on a specific date/hour/minute/second specified in these
fields. Available settings for each item are:
Alarm Date 01 ~ 31, Every Day
Alarm Hour 00 ~ 23
Alarm Minute 00 ~ 59
Alarm Second 00 ~ 59
MSI Reminds You...
If you have changed this setting, you must let the system boot up
until it enters the operating system, before this function will work.
MSI Reminds You...
1. You need to install a modem card supporting power on func-
tion for “Wake Up On Ring” function.
2. For “Wake-Up Key” function, the option “Specific Key” re-
fers to the password you specify in the “Wake-Up Password”
field. Once you set up a password, it will disable “Resume on
PS/2 Mouse”.
3. For “Resume On PS/2 Mouse” function, you need to left-
click the mouse to power on the system if the function is enabled.