Instruction manual

2-21
Hardware Setup
Bluetooth Connector: JBT1 (Optional)
This connector is used to connect a bluetooth module for wireless
connection.
Power Saving Switch Connector: JGS1 (Optional)
Attach a power saving switch to this connector. Pressing the switch once
will have the system enter the sleep/suspend state. Press any key to wake up
the system.
JGS1
JBT1
7
8
1
2
MSI Reminds You...
Because the bluetooth connector shares the USB interface with
blue-colored USB2.0 connector, the bottommost USB2.0 port will
not function when you attach a bluetooth module to this connector.
PIN SIGNAL PIN SIGNAL
1 5VDUAL 2 3VDUAL
3 D+ (USB signal) 4 GND
5 D- (USB signal) 6 GND
7 GND 8 NC
Pin Definition