Instruction manual

3-28
MS-6590 ATX Mainboard
MSI Reminds You...
Changing CPU Ratio/Vcore could result in the instability of the
system; therefore, it is NOT recommended to change the default
setting for long-term usage.
Default Vcore
It shows the default Vcore of the CPU, which is read-only.
VLink Voltage (V)
Adjusting the VLink voltage can increase the VLink voltage for the possible
overclocking. Setting options: Auto, 2.60, 2.70, 2.80.
DDR Voltage (V)
Adjusting the DDR voltage can increase the DDR speed. Any changes made
to this setting may cause a stability issue, so changing the DDR voltage for
long-term purpose is NOT recommended. Setting options: Auto, 2.55, 2.60, 2.
65, 2.70, 2.75, 2.80, 2.85, 2.90, 2.95, 3.00, 3.05, 3.10, 3.20, 3.25, 3.30.
AGP Voltage (V)
AGP voltage is adjustable in the field, allowing you to increase the performance
of your AGP display card when overclocking, but the stability may be affected.
Setting options: Auto, 1.55 to 2.10 at 0.05 increment.
MSI Reminds You...
The settings shown in different color in CPU Vcore (V), VLink
Voltage (V), DDR Voltage (V) and AGP Voltage (V) helps to
verify if your setting is proper for your system.
White: Safe setting.
Yellow: High performance setting.
Red: Not recommended setting and the system may be unstable.