Quick Start Thank you for purchasing the MSI® MAG Z490 TOMAHAWK motherboard. This Quick Start section provides demonstration diagrams about how to install your computer. Some of the installations also provide video demonstrations. Please link to the URL to watch it with the web browser on your phone or tablet. You may have even link to the URL by scanning the QR code.
Safety Information ∙∙ The components included in this package are prone to damage from electrostatic discharge (ESD). Please adhere to the following instructions to ensure successful computer assembly. ∙∙ Ensure that all components are securely connected. Loose connections may cause the computer to not recognize a component or fail to start. ∙∙ Hold the motherboard by the edges to avoid touching sensitive components.
Installing a Processor 2 ⚽⚽ 1 https://youtu.
Installing DDR4 memory ⚽⚽ http://youtu.
Connecting the Front Panel Header http://youtu.
Installing the Motherboard 1 ⚽⚽ https://youtu.be/wWI6Qt51Wnc Torque: 3 kgf·cm* 3 *3 kgf·cm = 0.3 N·m = 2.
Connecting the Power Connectors ⚽⚽ http://youtu.
Installing SATA Drives http://youtu.
Installing a Graphics Card http://youtu.
Connecting Peripheral Devices 10 Safety Information
Power On 1 2 3 4 Safety Information 11
Contents Quick Start.............................................................................................................. 1 Preparing Tools and Components.......................................................................... 1 Safety Information.................................................................................................. 2 Installing a Processor............................................................................................. 3 Installing DDR4 memory.........
JRGB1~2: RGB LED connectors............................................................................ 40 JRAINBOW1~2: Addressable RGB LED connectors............................................. 41 Onboard LEDs....................................................................................................... 42 EZ Debug LED........................................................................................................ 42 LED_SW1: EZ LED Control..................................................
Specifications CPU Chipset Supports 10th Gen Intel® Core™ and Pentium® Gold / Celeron® processors for LGA 1200 socket* * Please go to intel.com for compatibility information. * Onboard graphics output are disabled when using the F SKU processors.
Continued from previous page RAID LAN Intel® Z490 Chipset ∙∙ Supports RAID 0, RAID1, RAID 5 and RAID 10 for SATA storage devices ∙∙ Supports RAID 0 and RAID 1 for M.2 PCIe storage devices ∙∙ 1x Intel® I219V 1G LAN controller ∙∙ 1x Realtek® RTL8125B 2.5G LAN controller ∙∙ Intel® Z490 Chipset ▪▪1x USB 3.2 Gen 2 10Gbps Type-A port on the back panel USB ▪▪7x USB 3.2 Gen 1 5Gbps (4 Type-A ports on the back panel, 2 ports through the internal USB connector, 1 Type-C internal connector) ▪▪2x USB 2.
Continued from previous page ∙∙ 1x 24-pin ATX main power connector ∙∙ 1x 8-pin ATX 12V power connector ∙∙ 1x 4-pin ATX 12V power connector ∙∙ 6x SATA 6Gb/s connectors ∙∙ 1x USB 3.2 Gen 1 5Gbps Type-C port ∙∙ 1x USB 3.2 Gen 1 5Gbps connector (support additional 2 USB 3.2 Gen 1 5Gbps ports) ∙∙ 2x USB 2.0 connectors (support additional 4 USB 2.
Continued from previous page ∙∙ Drivers ∙∙ DRAGON CENTER Software ∙∙ Intel Extreme Tuning Utility ∙∙ MSI App Player (BlueStacks) ∙∙ Open Broadcaster Software (OBS) ∙∙ CPU-Z MSI GAMING ∙∙ Google Chrome™, Google Toolbar, Google Drive ∙∙ Norton™ Internet Security Solution ∙∙ Gaming Mode ∙∙ Gaming Hotkey ∙∙ LAN Manager ∙∙ Mystic Light Dragon Center Features ∙∙ User Scenario ∙∙ Monitor(Hardware Monitor) ∙∙ True Color ∙∙ Live Update ∙∙ DPC Latency tuner ∙∙ Speed Up Please refer to http://download.msi.
Continued from previous page ∙∙ LED ▪▪Mystic Light ▪▪Mystic Light Extension (RGB) ▪▪Mystic Light Extension (RAINBOW) ▪▪Mystic Light Sync ▪▪EZ DEBUG LED ▪▪EZ LED Control ∙∙ Protection ▪▪PCIe Steel Armor ▪▪Pre-installed IO shielding ∙∙ Performance ▪▪Multi GPU-CrossFire Technology ▪▪DDR4 Boost ▪▪Core Boost ▪▪GAME Boost ▪▪Lightning USB 20G ▪▪USB 3.
Package contents Please check the contents of your motherboard package. It should contain: Motherboard Documentation Application Cables Accessories ⚠⚠Important User manual MAG Z490 TOMAHAWK Quick installation guide Driver DVD SATA 6G cables (2 cables/pack) Case badge Product registration card M.2 screws (3 pcs./pack) 1 1 1 1 1 1 1 If any of the above items are damaged or missing, please contact your retailer.
Block Diagram 2 Channel DDR4 Memory Processor DMI 3.0 1x SATA 6Gb/s 2x PCIe x1 slots Switch Intel LAN I219V 1x M.2 2x SATA 6Gb/s Realtek LAN RTL8125B PCH Switch 1x M.2 3x SATA 6Gb/s 7x USB 3.2 Gen1 1x USB 3.2 Gen2 6x USB 2.0 ASMedia ASM3241 1x USB 3.
Rear I/O Panel PS/2 USB 2.0 USB 3.2 Gen 2 10Gbps Type-A Displayport HDMI port USB 3.2 Gen 1 5Gbps USB 3.2 Gen 2x2 20Gbps Type-C LAN Port LED Status Table Link/ Activity LED Speed LED Off Off Status Yellow (2.5Gb LAN) Green (1Gb LAN) Blinking Description No link Linked Data activity Audio Ports 1 Gbps LAN 2.5 Gbps LAN Optical S/PDIF-Out Status 2.5 Gbps LAN 1 Gbps LAN Green 100 Mbps / 1 Gbps 100 Mbps Orange 10 Mbps － 2.
Realtek Audio Console After Realtek Audio Console is installed. You can use it to change sound settings to get better sound experience. Application Enhancement Device Selection Main Volume Connector Settings Jack Status ∙∙ Device Selection - allows you to select a audio output source to change the related options. The check sign indicates the devices as default.
Audio jacks to headphone and microphone diagram Audio jacks to stereo speakers diagram AUDIO INPUT Audio jacks to 7.
Overview of Components CPU_PWR1 CPU Socket CPU_PWR2 DIMMB1 DIMMA2 DIMMB2 DIMMA1 JRGB2 CPU_FAN1 JRAINBOW2 PUMP_FAN1 SYS_FAN6 ATX_PWR1 JUSB4 SYS_FAN1 M2_1 PCI_E1 JUSB3 SATA▼1▲2 PCI_E2 JCI1 SATA▼3▲4 PCI_E3 SYS_FAN5 SYS_FAN4 M2_2 LED_SW1 JRTD3 JFP1 PCI_E4 JAUD1 JRGB1 SYS_FAN2 SYS_FAN3 JBAT1 JUSB2 JT1 JFP2 JRAINBOW1 24 Overview of Components JTBT1 SATA6 SATA5 JTPM1 JUSB1
Component Contents Port Name Port Type CPU_PWR1, ATX_PWR1 Power Connectors 29 Memory slots 27 Clear CMOS (Reset BIOS) Jumper 38 Front Panel Connectors 30 RGB LED connectors 40 Thunderbolt Add-on Card Connector 37 USB 2.0 Connectors 35 USB 3.2 Gen 1 Type-C Connector 35 M.
CPU Socket Distance from the center of the CPU to the nearest DIMM slot. 50.6 mm Introduction to the LGA 1200 CPU The surface of the LGA 1200 CPU has two notches and a golden triangle to assist in correctly lining up the CPU for motherboard placement. The golden triangle is the Pin 1 indicator. ⚠⚠Important ∙∙ Always unplug the power cord from the power outlet before installing or removing the CPU. ∙∙ Please retain the CPU protective cap after installing the processor.
DIMM Slots DIMMA1 Channel A DIMMA2 DIMMB1 Channel B DIMMB2 Memory module installation recommendation DIMMA2 ⚠⚠Important DIMMA2 DIMMB2 DIMMA1 DIMMA2 DIMMB1 DIMMB2 ∙∙ Always insert memory modules in the DIMMA2 slot first. ∙∙ To ensure system stability for Dual channel mode, memory modules must be of the same type, number and density.
PCI_E1~4: PCIe Expansion Slots PCI_E1: PCIe 3.0 x16 (CPU) PCI_E2: PCIe 3.0 x1 (PCH) PCI_E3: PCIe 3.0 x4 (PCH) ⚠⚠Important PCI_E4: PCIe 3.0 x1 (PCH) ∙∙ If you install a large and heavy graphics card, you need to use a tool such as MSI Gaming Series Graphics Card Bolster to support its weight to prevent deformation of the slot. ∙∙ For a single PCIe x16 expansion card installation with optimum performance, using the PCI_E1 slot is recommended.
CPU_PWR1, ATX_PWR1: Power Connectors These connectors allow you to connect an ATX power supply. 1 2 3 4 1 24 1 13 ⚠⚠Important Ground Ground 5 Ground 4 2 3 1 3 Ground 5 Ground 17 7 Ground 19 4 +12V +12V 13 +3.3V 15 Ground +3.3V 14 +5V 16 PS-ON# 18 Ground +5V 8 PWR OK 10 +12V 12 +12V CPU_PWR2 3 11 +12V 8 +3.3V 9 +12V 7 1 6 +12V 6 Ground Ground CPU_PWR1 Ground 4 ATX_PWR1 5 1 2 2 12 8 4 5VSB +12V +3.
JFP1, JFP2: Front Panel Connectors These connectors connect to the switches and LEDs on the front panel.
M2_1~2: M.2 Slots (Key M) ⚽⚽Video Demonstration Watch the video to learn how to Install M.2 module. http://youtu.be/JCTFABytrYA ⚠⚠Important ∙∙ Intel® RST only supports PCIe M.2 SSD with UEFI ROM. ∙∙ Intel® Optane™ Memory Ready for all M.2 slots. Installing M.2 module 1. Loosen the screws of M.2 SHIELD FROZR heatsink. 2. Remove the M.2 SHIELD FROZR and remove the protective films from the thermal pads.
3. Move the position of the standoffs according to your M.2 SSDs length if need. 4. Insert your M.2 SSD into the M.2 slot at a 30-degree angle. 5. Secure the M.2 SSD in place with the supplied M.2 8.5H screw. 4 8.5H screw Standoff 5 30º 3 6. Put the M.2 SHIELD FROZR heatsink back in place and secure it.
SATA1~6: SATA 6Gb/s Connectors These connectors are SATA 6Gb/s interface ports. Each connector can connect to one SATA device. SATA2 SATA1 SATA4 SATA3 SATA5 ⚠⚠Important SATA6 ∙∙ Please do not fold the SATA cable at a 90-degree angle. Data loss may result during transmission otherwise. ∙∙ SATA cables have identical plugs on either sides of the cable. However, it is recommended that the flat connector be connected to the motherboard for space saving purposes.
CPU_FAN1, PUMP_FAN1, SYS_FAN1~6: Fan Connectors Fan connectors can be classified as PWM (Pulse Width Modulation) Mode or DC Mode. PWM Mode fan connectors provide constant 12V output and adjust fan speed with speed control signal. DC Mode fan connectors control fan speed by changing voltage. You can follow the instruction below to adjust the fan connector to PWM or DC Mode.
JUSB1~2: USB 2.0 Connectors These connectors allow you to connect USB 2.0 ports on the front panel. 1 VCC 3 10 1 9 USB0- 5 USB0+ 7 ⚠⚠Important 2 Ground 9 No Pin 2 4 6 8 10 VCC USB1- USB1+ Ground NC ∙∙ Note that the VCC and Ground pins must be connected correctly to avoid possible damage. ∙∙ In order to recharge your iPad,iPhone and iPod through USB ports, please install MSI DRAGON CENTER utility. JUSB4: USB 3.2 Gen 1 Type-C Connector This connector allows you to connect USB 3.
JUSB3: USB 3.2 Gen 1 Connector These connectors allow you to connect USB 3.2 Gen 1 5Gbps ports on the front panel. 1 USB3_RX_DN 4 Ground 3 USB3_RX_DP 5 USB3_TX_C_DN 7 Ground 6 8 9 ⚠⚠Important Power 2 10 USB3_TX_C_DP USB2.0- USB2.0+ NC 10 11 1 20 11 12 13 14 USB2.0+ USB2.0Ground USB3_TX_C_DP 15 USB3_TX_C_DN 17 USB3_RX_DP 16 Ground 18 USB3_RX_DN 20 No Pin 19 Power Note that the Power and Ground pins must be connected correctly to avoid possible damage.
JTBT1: Thunderbolt Add-on Card Connector This connector allows you to connect the add-on Thunderbolt I/O card. 1 1 FORCE_PWR 5 GND 3 2 SLP_S3# 4 SCI_EVENT SLP_S5# JRTD3: Intel RTD3 Connector This connector allows you to connect the RTD3 connector on the add-on Thunderbolt I/O card that supports RTD3.
JBAT1: Clear CMOS (Reset BIOS) Jumper There is CMOS memory onboard that is external powered from a battery located on the motherboard to save system configuration data. If you want to clear the system configuration, set the jumper to clear the CMOS memory. Keep Data (default) Clear CMOS/ Reset BIOS Resetting BIOS to default values 1. Power off the computer and unplug the power cord 2. Use a jumper cap to short JBAT1 for about 5-10 seconds. 3. Remove the jumper cap from JBAT1. 4.
JCI1: Chassis Intrusion Connector This connector allows you to connect the chassis intrusion switch cable. Normal (default) Trigger the chassis intrusion event Using chassis intrusion detector 1. Connect the JCI1 connector to the chassis intrusion switch/ sensor on the chassis. 2. Close the chassis cover. 3. Go to BIOS > SETTINGS > Security > Chassis Intrusion Configuration. 4. Set Chassis Intrusion to Enabled. 5. Press F10 to save and exit and then press the Enter key to select Yes. 6.
JRGB1~2: RGB LED connectors The JRGB connector allows you to connect the 5050 RGB LED strips 12V. 1 1 3 +12V R 2 4 G B RGB LED Strip Connection 1 G R B RGB extension cable JRGB connector 5050 RGB LED strips 12V RGB LED Fan Connection JRGB connector 1 G R B 1 System Fan connector ⚠⚠Important RGB LED Fan ∙∙ The JRGB connector supports up to 2 meters continuous 5050 RGB LED strips (12V/G/R/B) with the maximum power rating of 3A (12V).
JRAINBOW1~2: Addressable RGB LED connectors The JRAINBOW connectors allow you to connect the WS2812B Individually Addressable RGB LED strips 5V. 1 1 3 +5V 2 No Pin 4 Data Ground Addressable RGB LED Strip Connection +5V 1 D JRAINBOW connector Rainbow RGB LED extension cable Addressable RGB LED Fan Connection WS2812B Individually Addressable RGB LED strips 5V JRAINBOW connector 1 1 System Fan connector ⚠⚠CAUTION Addressable RGB LED Fan Do not connect the wrong type of LED strips.
Onboard LEDs EZ Debug LED These LEDs indicate the debug status of the motherboard. CPU - indicates CPU is not detected or fail. DRAM - indicates DRAM is not detected or fail. VGA - indicates GPU is not detected or fail. BOOT - indicates the booting device is not detected or fail. LED_SW1: EZ LED Control This switch is used to switch on/ off all the LEDs of motherboard.
Installing OS, Drivers & Utilities Please download and update the latest utilities and drivers at www.msi.com Installing Windows® 10 1. Power on the computer. 2. Insert the Windows® 10 installation disc/USB into your computer. 3. Press the Restart button on the computer case. 4. Press F11 key during the computer POST (Power-On Self Test) to get into Boot Menu. 5. Select the Windows® 10 installation disc/USB from the Boot Menu. 6. Press any key when screen shows Press any key to boot from CD or DVD...
UEFI BIOS MSI UEFI BIOS is compatible with UEFI (Unified Extensible Firmware Interface) architecture. The UEFI BIOS firmware infrastructure has many new functions and advantages that traditional BIOS cannot achieve. It will fully support future PCs and devices that comply with UEFI firmware architecture. ⚠⚠Important The term BIOS in this user guide refers to UEFI BIOS unless otherwise noted.
BIOS Setup The default settings offer the optimal performance for system stability in normal conditions. You should always keep the default settings to avoid possible system damage or failure booting unless you are familiar with BIOS. ⚠⚠Important ∙∙ BIOS items are continuously update for better system performance. Therefore, the description may be slightly different from the latest BIOS and should be for reference only. You could also refer to the HELP information panel for BIOS item description.
Resetting BIOS You might need to restore the default BIOS setting to solve certain problems. There are several ways to reset BIOS: ∙∙ Go to BIOS and press F6 to load optimized defaults. ∙∙ Short the Clear CMOS jumper on the motherboard. ⚠⚠Important Be sure the computer is off before clearing CMOS data. Please refer to the Clear CMOS jumper section for resetting BIOS.
Updating the BIOS with MSI DRAGON CENTER Before updating: Make sure the LAN driver is already installed and the internet connection is set properly. Updating BIOS: 1. Install and launch MSI DRAGON CENTER and go to Support page. 2. Select Live Update and click on Advance button. 3. Click on Scan button to search the latest BIOS file. 4. Select the BIOS file and click on Download icon to download and install the latest BIOS file. 5. Click Next and choose In Windows mode.
EZ Mode At EZ mode, it provides the basic system information and allows you to configure the basic setting. To configure the advanced BIOS settings, please enter the Advanced Mode by pressing the Setup Mode switch or F7 function key. XMP Profile Setup Mode switch Screenshot Search Language System information GAME BOOST Boot device priority bar Component Information M-Flash Favorites Hardware Monitor Function buttons ∙∙ GAME BOOST - click on it to toggle the GAME BOOST for overclocking.
∙∙ Language - allows you to select language of BIOS setup. ∙∙ System information - shows the CPU/ DDR speed, CPU/ MB temperature, MB/ CPU type, memory size, CPU/ DDR voltage, BIOS version and build date. ∙∙ Boot device priority bar - you can move the device icons to change the boot priority. The boot priority from high to low is left to right. ∙∙ Component Information - click on the CPU, Memory, Storage, Fan Info and Help buttons to show the information of connected component.
∙∙ M-Flash - click on this button to enter the M-Flash menu that provides the way to update BIOS with a USB flash drive. ∙∙ Hardware Monitor - click on this button to enter the Hardware Monitor menu that allows you to manually control the fan speed by percentage. ∙∙ Favorites - click on this button or press the F3 key to show the Favorites window. It provides 5 menus for you to create personal BIOS menu where you can save and access favorite/ frequently-used BIOS setting items.
▪▪To delete a BIOS item from favorite menu 1. Select a BIOS item on favorite menu. 3. Choose Delete and click on OK. 2. Right-click or press F2 key.
Advanced Mode Press Setup Mode switch or F7 function key can switch between EZ Mode and Advanced Mode in BIOS setup. BIOS menu selection BIOS menu selection Menu display ∙∙ BIOS menu selection - the following options are available: ▪▪SETTINGS - allows you to specify the parameters for chipset and boot devices. ▪▪OC - allows you to adjust the frequency and voltage. Increasing the frequency may get better performance. ▪▪M-FLASH - provides the way to update BIOS with a USB flash drive.
SETTINGS Menu This menu allows you to specify the parameters for system, chipset and boot devices. ▶▶System Status sub-menu The System Status sub-menu allows you to set the system clock and view system information. ▶▶System Date Sets the system date. Use tab key to switch between date elements. The format is . Day of the week, from Sun to Sat, determined by BIOS. Read-only. The month from Jan. through Dec.
▶▶Integrated Graphics Configuration sub-menu Adjusts integrated graphics settings for optimum system. This sub-menu is only available when using the CPU which integrate with IGP. ▶▶Intel (R) Thunderbolt sub-menu Sets the Intel thunderbolt device function. This sub-menu is only available when using the Intel thunderbolt device. ▶▶USB Configuration sub-menu Sets the onboard USB controller and device function. Press Enter to enter the sub-menu.
OC Menu This menu allows you to configure the frequencies and voltages for overclocking. Please note that, higher frequency and voltage may benefit overclocking capability but cause system un-stability. ⚠⚠Important ∙∙ Overclocking your PC manually is only recommended for advanced users. ∙∙ Overclocking is not guaranteed, and if done improperly, it could void your warranty or severely damage your hardware.
▶▶Core X X of X xxxx MHz [Auto] Allows you to set the CPU ratios for different number of active cores. These items only appear when CPU Ratio Apply Mode set to Per Core. ▶▶Turbo Ratio Offset Value [Auto] Sets the CPU Turbo ratio offset value. This item only appears when CPU Ratio Apply Mode set to Turbo Ratio Offset. ▶▶CPU Ratio Mode [Dynamic Mode]* Selects the CPU Ratio operating mode. This item will appear when you set the CPU ratio manually. [Fixed Mode] [Dynamic Mode] Fixes the CPU ratio.
▶▶Extreme Memory Profile (XMP) [Disabled] XMP (Extreme Memory Profile) is the overclocking technology by memory module. Please enable XMP or select a profile of memory module for overclocking the memory. This item will be available when the memory modules that support XMP is installed. ▶▶DRAM Reference Clock [Auto]* Sets the DRAM reference clock. The valid value range depends on the installed CPU. This item appears when a CPU that supports this adjustment is installed.
▶▶CPU Core/ GT Voltage Mode [Auto]* Sets the CPU Core/ GT voltage mode. ▶▶CPU Core Voltage Mode [Auto]* Sets the CPU Core voltage mode. ▶▶CPU Voltages control [Auto] These options allow you to set the voltages related to CPU. If set to Auto, BIOS will set these voltages automatically or you can set it manually. ▶▶DRAM Voltages control [Auto] These options allow you to set the voltages related to memory. If set to Auto, BIOS will set these voltages automatically or you can set it manually.
M-FLASH Menu M-FLASH provides the way to update BIOS with a USB flash drive. Please download the latest BIOS file that matches your motherboard model from MSI website, save the BIOS file into your USB flash drive. And then follow the steps below to update BIOS. 1. Insert the USB flash drive that contains the update file into the computer. 2. Click on M-FLASH tab, a demand message will be prompted. Click on Yes to reboot and enter the flash mode. 3.
OC PROFILE Menu This menu allows you to set the BIOS profiles. ▶▶Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6 Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6 management. Press Enter to enter the sub-menu. ▶▶Set Name for Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6 Name the current overclocking profile. ▶▶Save Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6 Save the current overclocking profile. ▶▶Load Overclocking Profile 1/ 2/ 3/ 4/ 5/ 6 Load the current overclocking profile.
HARDWARE MONITOR Menu This menu allows you to adjust the fan speed manually and monitor CPU/ system voltage. Select a temperature curve line (white) to be showed in Fan operating window Select a fan mode for target fan Select a fan to be configured Click to enable the Smart Fan Smart Fan duty information Fan operating window Setting Buttons Temperature information Voltage information ∙∙ Smart Fan - This setting enables/disables the Smart Fan function.
Adjusting fans 1. Selects a fan that you want to adjust and to display the fan duty curve line (yellow) in fan operating windows. 2. Click and drag the duty points to adjust the fan speed. Select a fan to be adjusted Duty points ⚠⚠Important The pictures in this section are for reference only and may vary from the motherboard you purchased.
RAID Configuration Below are the different types of a RAID. RAID 0 RAID 1 RAID 5 breaks the data into blocks which are written to separate hard drives. Spreading the hard drive I/O load across independent channels greatly improves I/O performance. provides data redundancy by mirroring data between the hard drives and provides enhanced read performance. provides data striping at the byte level and also stripe error correction information. This results in excellent performance and good fault tolerance.
Creating RAID Volume 1. As previously mentioned, enable Intel(R) Rapid Storage Technology. 2. Enter Create RAID Volume screen. The following screen appears: 3. Specify a Name for RAID volume. 4. Select the RAID Level best suited to your usage model in RAID Level. 5. In the Select Disks field, press Space key or press Enter key and use the ↑↓ arrow keys to select the option X to select the disks you want to create for the RAID volume. 6. Select the Strip Size for the RAID array.
Removing a RAID Volume Here you can delete the RAID volume, but please be noted that all data on RAID drives will be lost. ⚠⚠Important If your system currently boots to RAID and you delete the RAID volume, your system will become unbootable. 1. Go to BIOS > SETTING > Advanced > Intel(R) Rapid Storage Technology. 2. Select the RAID volume from the Intel(R) Rapid Storage Technology screen to enter the RAID VOLUME INFO screen. 3.
Resetting Disks to Non-RAID 1. Go to BIOS > SETTING > Advanced > Intel(R) Rapid Storage Technology. 2. Select the RAID volume from the Intel(R) Rapid Storage Technology screen to enter the RAID VOLUME INFO screen. 3. Select the disk and press Enter to enter PHYSICAL DISK INFO screen. 4. Select Reset to non-RAID item and press Enter to delete the RAID volume and remove any RAID structures from the drives. The following screen appears: 5.
Rebuilding RAID Array A RAID 1, RAID 5 or RAID 10 volume is reported as Degraded when one of its hard drive members fails or is temporarily disconnected, and data mirroring is lost. As a result, the system can only utilize the remaining functional hard drive member. To reestablish data mirroring and restore data redundancy, refer to the procedure below that corresponds to the current situation. 1. Power off. 2. Replace the failed hard drive with a new one that is of equal or greater capacity. 3.
Installing RAID Driver New Operating System Installation The following details the installation of the drivers while installing Windows 10 x64 bit Editions or newer operating system. 1. During the operating system installation, after selecting the location to install Windows click on Load driver button to install a third party RAID driver. 2. When prompted, insert the USB flash drive with Intel RAID Drivers and then click Browse. ▪▪To make an Intel RAID Drivers USB flash drive.
Intel® Optane™ Memory Configuration Intel® Optane™ memory can accelerate the Windows 10 64bit operating system. This section describes how to install and remove the Intel® Optane™ memory. System Requirements ∙∙ Intel® Optane™ memory ready MSI® motherboards ∙∙ Supported 10th Gen, or later, Intel® Core™ - i Processor ∙∙ Operating system: Windows 10 64 bit (UEFI mode). ∙∙ Intel® Optane™ Memory Module Installing the Intel® Optane™ memory Install the Intel® Rapid Storage Technology. 1.
5. Enable Intel® Optane™ Memory. ▫▫Run the Intel® Rapid Storage Technology software. ▫▫Click Intel® Optane™ Memory tab and click Enable. ▫▫Click Yes in the dialog. 6. Reboot System. ⚠⚠WARNING Once you enable Intel® Optane™ memory, in order to prevent seriously damage your operating system, please follow the cautions listed below. ∙∙ DO NOT set the SATA mode back to AHCI in BIOS. ∙∙ DO NOT revert back to older version of the BIOS. ∙∙ DO NOT remove the Intel® Optane™ memory module.
Removing the Intel® Optane™ memory If you no longer want to use Intel® Optane™ memory, you have to disable the Intel® Optane™ memory before removing the Intel® Optane™ memory module to avoid operating system damage. Please follow the steps below to remove the Intel® Optane™ memory. 1. Disable Intel® Optane™ Memory. ▫▫Disable Intel® Optane™ Memory via the Intel® Optane™ memory application (Intel® Rapid Storage Technology). ▫▫Click Yes in the dialog. ▫▫Reboot System. 2. Disable M.
Troubleshooting Before sending the motherboard for RMA repair, try to go over troubleshooting guide first to see if your got similar symptoms as mentioned below. The power is not on. ∙∙ Connect the AC power cord to an electrical outlet securely. ∙∙ Check if all ATX power connectors like ATX_PWR1, CPU_PWR1 are connected from the power supply to the motherboard? ∙∙ Some power supply units have a power button on the rear side, make sure the button is turned on.
Regulatory Notices FCC Compliance Statement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
municipal wastes anymore, and manufacturers of covered electronic equipment will be obligated to take back such products at the end of their useful life. MSI will comply with the product take back requirements at the end of life of MSI-branded products that are sold into the EU. You can return these products to local collection points. su período de vida. MSI estará comprometido con los términos de recogida de sus productos vendidos en la Unión Europea al final de su periodo de vida.
ČESKY Záleží nám na ochraně životního prostředí - společnost MSI upozorňuje... Podle směrnice Evropské unie (“EU”) o likvidaci elektrických a elektronických výrobků 2002/96/ EC platné od 13. srpna 2005 je zakázáno likvidovat “elektrické a elektronické výrobky” v běžném komunálním odpadu a výrobci elektronických výrobků, na které se tato směrnice vztahuje, budou povinni odebírat takové výrobky zpět po skončení jejich životnosti.
MS-7C80主板产品中有害物质的名称及含量 部件名称 铅 汞 镉 有害物质 六价铬 多溴联苯 多溴二苯醚 ○ ○ ○ (Pb) (Hg) (Cd) (Cr(VI)) 电池** ╳ ○ ○ ○ ○ ○ 外部信号连接头 ╳ ○ ○ ○ ○ ○ 印刷电路板组件* 线材 本表格依据 SJ/T 11364 的规定编制。 ╳ ╳ ○ ○ ○ ○ (PBB) ○ ○ (PBDE) ○ ○: 表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572 规定的限量要求以下。 ╳: 表示该有害物质至少在该部件的某一均质材料中的含量超出 GB/T 26572 规定的限量要求，但所有部件都符合 欧盟RoHS要求。 * 印刷电路板组件: 包括印刷电路板及其构成的零部件。 ** 电池本体上如有环保使用期限标识，以本体标识为主。 ■ 上述有毒有害物质或元素清单会依型号之部件差异而有所增减。 ■ 產品部件本体上如有环保使用期限标识，以本体标识为主。 限用物質含有情況標示聲明書 設備名稱：電腦主機板 單元 電路板 電子元件 金屬機構件
