User Manual
Table Of Contents
- Quick Start
- Safety Information
- Specifications
- Package contents
- Block Diagram
- Rear I/O Panel
- Overview of Components
- CPU Socket
- DIMM Slots
- PCI_E1~4: PCIe Expansion Slots
- CPU_PWR1, ATX_PWR1: Power Connectors
- JFP1, JFP2: Front Panel Connectors
- JAUD1: Front Audio Connector
- M2_1~2: M.2 Slots (Key M)
- SATA1~6: SATA 6Gb/s Connectors
- CPU_FAN1, PUMP_FAN1, SYS_FAN1~6: Fan Connectors
- JUSB1~2: USB 2.0 Connectors
- JUSB4: USB 3.2 Gen 1 Type-C Connector
- JUSB3: USB 3.2 Gen 1 Connector
- JTBT1: Thunderbolt Add-on Card Connector
- JRTD3: Intel RTD3 Connector
- JBAT1: Clear CMOS (Reset BIOS) Jumper
- JTPM1: TPM Module Connector
- JCI1: Chassis Intrusion Connector
- JRGB1~2: RGB LED connectors
- JRAINBOW1~2: Addressable RGB LED connectors
- Onboard LEDs
- Installing OS, Drivers & Utilities
- UEFI BIOS
- RAID Configuration
- Intel® Optane™ Memory Configuration
- Troubleshooting
31
Overview of Components
M2_1~2: M.2 Slots (Key M)
⚠
Important
∙
Intel® RST only supports PCIe M.2 SSD with UEFI ROM.
∙
Intel® Optane™ Memory Ready for all M.2 slots.
⚽
Video Demonstration
Watch the video to learn how to Install
M.2 module.
http://youtu.be/JCTFABytrYA
1
1
1
1
2
2
Installing M.2 module
1. Loosen the screws of M.2 SHIELD FROZR heatsink.
2. Remove the M.2 SHIELD FROZR and remove the protective films from the thermal
pads.
M2_1
M2_2