User Manual
Table Of Contents
- Quick Start
- Safety Information
- Specifications
- Package contents
- Block Diagram
- Rear I/O Panel
- Overview of Components
- CPU Socket
- DIMM Slots
- PCI_E1~4: PCIe Expansion Slots
- CPU_PWR1, ATX_PWR1: Power Connectors
- JFP1, JFP2: Front Panel Connectors
- JAUD1: Front Audio Connector
- M2_1~2: M.2 Slots (Key M)
- SATA1~6: SATA 6Gb/s Connectors
- CPU_FAN1, PUMP_FAN1, SYS_FAN1~6: Fan Connectors
- JUSB1~2: USB 2.0 Connectors
- JUSB4: USB 3.2 Gen 1 Type-C Connector
- JUSB3: USB 3.2 Gen 1 Connector
- JTBT1: Thunderbolt Add-on Card Connector
- JRTD3: Intel RTD3 Connector
- JBAT1: Clear CMOS (Reset BIOS) Jumper
- JTPM1: TPM Module Connector
- JCI1: Chassis Intrusion Connector
- JRGB1~2: RGB LED connectors
- JRAINBOW1~2: Addressable RGB LED connectors
- Onboard LEDs
- Installing OS, Drivers & Utilities
- UEFI BIOS
- RAID Configuration
- Intel® Optane™ Memory Configuration
- Troubleshooting
Removing the Intel® Optane™ memory
If you no longer want to use Intel® Optane™ memory, you have to disable the Intel®
Optane™ memory before removing the Intel® Optane™ memory module to avoid
operating system damage. Please follow the steps below to remove the Intel®
Optane™ memory.
1. Disable Intel® Optane™ Memory.
▫ Disable Intel® Optane™ Memory via the Intel® Optane™ memory application
(Intel® Rapid Storage Technology).
▫ Click Yes in the dialog.
▫ Reboot System.
2. Disable M.2/Optane Genie
▫ Press Delete key to enter BIOS Setup menu during POST.
▫ Disable M.2/Optane Genie by clicking M.2/Optane Genie item.
▫ Click Ok in the dialog.
▫ Press F10 to save configuration and exit.
3. Remove the Intel® Optane™ memory module.
▫ Power off the system.
▫ Remove the Intel® Optane™ memory module.
71
Intel® Optane™ Memory Configuration