User`s guide

Upgrade Firmware

MEGA VIEW 561 firmware can be upgraded. You need a computer with

CD-ROM, the Driver and Recovery CD (or download upgrade file from MSI

website), and the supplied USB cable ready for the following procedures:

Note: To prevent battery runs out while upgrading and causes system failure,

it is recommended to plug the AC Adaptor to provide electricity.

Note: If you need to update both firmware and software, update firmware first.

1. Connect MEGA VIEW 561 to your computer with the USB cable.

2. Power on MEGA VIEW 561 to let your computer to initialize it.

3. Copy "system" folder from the Driver CD, or download it from MSI website,

to the root directory of your MEGA VIEW 561.

4. Disconnect the USB cable from your computer.

5. Select Setting from main menu and press

/Enter button to enter.

6. Push Navigation key right or left to select Info tab.

7. Push Navigation key up or down to select Update software.

8. Push Navigation key right. Message "Confirm? Yes No" will appear on

the display.

9. Push Navigation key right or left to select Ye s and press

/Enter to start to

upgrade firmware. Or select No and enter to cancel upgrade.

10. When firmware upgrade completes, system will restart.