Instruction manual

Hardware Setup

2-21

(SHORT pin# 11~14)

- Enable Line-out connector on

the back panel

- Disable Front Panel Audio

Connector

Note: To have the Line-out connector on the back panel work

properly, you need to place the jumper on the pin# 11~14 of the

FRONT AUDIO connector. Otherwise, this Line-out connector will

not function and nothing can be heard through speakers or

headphones attached to the connector. But front panel audio

connector is enabled at this point and allows you to connect

speakers or headphones.

(OPEN pin# 11~14)

- Disable Line-out connector on

the back panel

- Enable Front Panel Audio

Connector