Instruction manual

Chapter 2

2-22

Clear CMOS Jumper: JBIOS

There is a CMOS RAM on board that has a power supply from external

battery to keep the data of system configuration. With the CMOS RAM, the

system can automatically boot OS every time it is turned on. If you want to

clear the system configuration stored in the CMOS RAM, use the JBIOS (Clear

CMOS Jumper ) to clear data. Follow the instructions below to clear the data:

Jumpers

JBIOS

The motherboard provides the following jumpers for you to set the

computer’s function. This section describes how to change your motherboard’s

function through the use of jumpers.

keep data

clear data

You can clear CMOS by shorting 2-3 pin while the system

is off. Then return to 1-2 pin position. Avoid clearing the

CMOS while the system is on; it will damage the

mainboard.

WARNING!