Instruction manual

AWARD
®
BIOS Setup
3-21
Parallel Port EPP Type
The item selects the EPP version used by the parallel port if the port is set to
EPP or ECP/EPP mode. Settings: EPP1.7 and EPP1.9.
Onboard Legacy Audio
The item enables or disables the onboard audio features of the mainbaord
and the following audio options in the BIOS.
Sound Blaster
The item turns on/off the Sound Blaster feature of the board. If you want to
play the Sound Blaster compatible games, you need to set the field to
Enabled.
SB I/O Base Address
This item specifies the I/O Base Address for the Sound Blaster. Settings are
220H, 240H, 260H and 280H.
SB IRQ Select
This item specifies the IRQ for the Sound Blaster. Settings: IRQ 5, IRQ 7,
IRQ 9 and IRQ 10.
SB DMA Select
This item specifies the DMA channel for the Sound Blaster. Settings: DMA
1, DMA 2, DMA 3 and DMA 0.
MPU-401
The field enables or disables the MPU-401 interface (the Yamaha Sound
Blaster mode).
MPU-401 I/O Address
This item selects the base I/O port address for the MPU-401 interface.
Settings: 330-333H, 300-303 and 310-313.
Game Port (200-207H)
The item enables or disables the Joystick/Game port.