Instruction manual

Chapter 3
3-26
VGA, LPT & COM, HDD & FDD, PCI Master, PowerOn by PCI Card, Wake
Up On LAN/Ring
These items specify whether the system will be awakened from power saving
modes when activity or input signal of the specified hardware peripheral or
component is detected.
RTC Alarm Resume
This is to enable or disable the feature of booting up the system on a
scheduled time/date. Settings: Enabled and Disabled.
Date (of Month)
Specifies the date for RTC Alarm Resume. Settings are 0~31.
Resume Time (hh:mm:ss)
Specifies the time for RTC Alarm Resume. Format is <hour><minute>
<second>.
IRQs Activity Monitoring
Press <Enter> to enter the sub-menu and the following screen appears:
Note: To use the function of “Wake Up On LAN/Ring”, you need to
install a modem/LAN card supporting power on function.