Instruction manual

Installing Drivers
4-5
Installation for Windows
®
NT4.0
1. Insert the supplied CD disk into the CD-ROM drive.
2. Copy all files under CD-ROM drive:\Network\Realtek\8139\Winnt4
to your hard disk. For example, copy the files to C:\Lan.
3. Right click on Network Neighborhood.
4. Select Properties.
5. Click Ye s to install the driver.
6. Click Next.
7. Choose Select from list.
8. Click Have Disk to specify the path of Lan driver.
9. Type the path where the Lan driver exists. In the above example, it
should be C:\Lan. Then click OK.
10. When the driver is found, click OK.
11. Follow the on-screen instructions and continue to click OK or Next.
12. When the Windows NT Setup window appears, insert the Windows
NT CD disk into CD-ROM drive and type the path to CD-ROM drive.
Then click OK to start copying Windows NT files into the system.
13. Follow the on-screen instructions to complete installation.
14. Restart your system.
Installation for Other O/S
To find out the installation procedures for other operating systems
such as Linux, insert the provided CD disk into the CD-ROM drive. Run or
type the path to:
CD-ROM drive:\Network\Realtek\8139\Help8139.exe
Then press spacebar to continue and installation of the LAN driver for
different operating systems is listed on the screen. Select the operating
system you need by using arrow keys and follow the installation procedures
provided.