Computer Computer Hardware User Manual

AWARD

BIOS Setup

3-23

Power Management Setup

IPCA function

This item is to activate the ACPI (Advanced Configuration and Power

Management Interface) Function. If your operating system is ACPI-aware,

such as Windows 98SE/2000/ME, select Enabled. Settings: Enabled and

Disabled.

Sleep State

This item specifies the power saving modes for ACPI function. If your

operating system supports ACPI, such as Windows 98SE, Windows ME and

Windows 2000, you can choose to enter the Standby mode in S1/POS or S3/

STR fashion through the setting of this field. Options are:

S1/POS The S1 sleep mode is a low power state. In this state,

no system context (CPU or chipset) is lost and hard-

ware maintains all system context.

S3/STR The S3 sleep mode is a power-down state in which

power is supplied only to essential components such

↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help

F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults

IPCA function Enabled

Sleep State S1/POS

Power Management Option User Define

HDD Power Down Disable

Doze Mode Disable

Suspend Mode Disable

PM Control by APM Yes

MODEM Use IRQ 3

Soft-Off by PWRBTN Instant-Off

IRQ/Event Activity Detect Press Enter

Power Management Setup

Item Help

Menu Level 8