Instruction manual

AMI
®
BIOS Setup
3-15
Mouse Wakeup From S3
This item allows the activity of the mouse to wake up the system from S3
(Suspend to RAM) sleep state. Settings: Disabled, Left-button, Right-button.
Keyboard Wakeup From S3
This item allows the activity of the keyboard to wake up the system from S3
(STR) sleep state. Settings: Disabled, Power Key, Any Key, Specific Key.
Specific Key for Wakeup
This setting allows users to set a specific key to wake up the system
when the Keyboard Wakeup From S3 function is set to Specific Key.
Power Management/APM
Setting to Enabled will activate an Advanced Power Management (APM)
device to enhance Max Saving mode and stop CPU internal clock. Settings are
Disabled and Enabled.
Power/Sleep LED
This item configures how the system uses power LED on the case to indicate
the sleep state. Available options are:
Single LED The power LED blinks to indicate the sleep state without
changing its color.
Dual LED The power LED changes its color to indicate the sleep
state.
Suspend Time Out (Minute)
After the selected period of system inactivity, all devices except the CPU shut
off. Settings are Disabled, 1, 2, 4, 8, 10, 20, 30, 40, 50, and 60.
FDC/LPT/COM Ports, Primary/Secondary Master/Slave IDE
These items specify if the BIOS will monitor the activity of the specified hard-
ware peripheral or component. If set to Monitor, any activity detected on the
specified hardware peripheral or component will wake up the system or pre-
vent the system from entering the power saving modes. Settings: Monitor and
Ignore.
Power Button Function
This feature sets the function of the power button. Settings are:
On/Off The power button functions as normal on/off button.
Suspend When you press the power button, the computer enters
the suspend/sleep mode, but if the button is pressed for