Computer Computer Hardware User Manual

Appendix A
A-2
Installing MSI Smart Key
Installation
Simply follow the few steps below, you can install the Smart Key into
your computer very easily.
1. Turn off the computer.
2. Locate the USB port on your computer.
3. Connect the cable to the USB port, and then plug the Smart Key
into the connector properly.
4. Turn on the computer, and now you can implement this power-
ful feature.
Note: After you have installed the Smart Key into your computer, the
BIOS will detect it when the system boots up, and you have to enabled/
disabled this function. Furthermore, you should install the dedicated
software application in the operating system, which is provided by MSI,
to obtain the overall protection on your system. The following sections
will provide the detailed instructions for the BIOS setup and software
installation.
System Requirements
Before you use the MSI Smart Key, please check the hardware, soft-
ware and operating system requirements first.
Operating System Windows 98/ME/2000/XP
Connector USB port
Disk Space At least 2 MB to install the
software application