Instruction manual

3-13
BIOS Setup
ATA/IDE Configuration
(Enhanced)
IDE [IDE1, SATA 1/2/3/4]
AHCI [IDE1, SATA 1/2/3/4]
RAID [IDE1, SATA 1/2/3/4],
[SATA support RAID 0 or 1]
For the setting options of Configure SATA as, select [IDE] if you want to have SATA
as IDE function. Select [AHCI] to allow the SATA to have Advanced Host Controller
Interface (AHCI) feature, which supports improved serial ATA disk performance with
native command queuing & native hot plug. Select [RAID] to use SATA as RAID
function. Setting options: [IDE], [AHCI], [RAID].