Specifications

7
name and password as before. This uses a Java applet to display the video.
2.5.1 Remote access using dial-up
You can access the VPON remotely without the Internet by using a dialup modem. The VPON must be
working under Network mode.
1. Connect a dial-up modem and phone line to the VPON COM1 port.
2. Set COM1 to modem device in the VPON system menu.
3. On the remote PC, create a new dial-up setting (Windows).
4. Set the protocol to PPP.
5. Clear all advanced options and allowed network protocols except TCP/IP.
6. Set the IP address to 10.0.0.2.
7. Put a check mark in the server assigned server address box, uncheck “use IP header compression” and
“use default gateway” on the network boxes. Then click OK.
8. Enter the number of the phone line connected to the VPON, as well as the administrator user name and
password.
9. To access the VPON, use IE 6.0 SP2 up. Bring up IE on the PC and then access to 10.0.0.1.
Note: As this is a PPP connection, only one user can access the VPON at a time.