Instruction manual

1-3
Getting Started
On-Board Peripherals
† On-Board Peripherals include:
- 1 floppy port supports 1 FDD with 360K, 720K, 1.2M, 1.44M and 2.88Mbytes
- 2 SPDIF ports
- 1 VGA port
- 1 parallel port supports SPP/EPP/ECP mode
- 1 Line-In / Line-Out / MIC-In / Rear Speaker Out / Center-Subwoofer Speaker Out/
Side Surround Out
- 8 USB ports (Rear * 6/ Front * 2)
- 1 RJ-45 LAN jack
LAN
† Intel 82562GT 10/100 Ethernet PHY
- Supports 10/ 100 Mb/s .
- Compliane with PCI 2.2.
- Supports ACPI Power Management.
1394 (optional)
† Supports two IEEE1394 onboard pinheader. Transfer rate is up to 400 Mbps.
† Controlled by VIA VT6307 chipset.
Audio
† High Definition link controller integrated in Intel
®
ICH6R/ICH6 chip.
† 8-channel audio codec Realtek ALC880.
- Compliant with Azalia 1.0 Spec.
BIOS
† The mainboard BIOS provides “Plug & Play” BIOS which detects the peripheral
devices and expansion cards of the board automatically.
† The mainboard provides a Desktop Management Interface (DMI) function which
records your mainboard specifications.
Mounting and Dimension
† M-ATX Form Factor: 9.6 inch (W) x 9.6 inch (L)
† 8 mounting holes