User`s manual

MS-7338 Mainboard
2-8
3
DIMM_DDR2_1
DIMM_DDR2_2
DIMM_DDR3_1
DIMM_DDR2_3
DIMM_DDR2_4
DIMM_DDR3_2
4
DIMM_DDR2_1
DIMM_DDR2_2
DIMM_DDR3_1
DIMM_DDR2_3
DIMM_DDR2_4
DIMM_DDR3_2
Dual channel mode
population rule for DDR2
(Install two DDR2/DDR3
Turbo Cards in
the DIMM_DDR3_1 and
DIMM_DDR3_2 slots)
Dual channel mode
population rule for DDR3
(Install two DDR2/DDR3
Turbo Cards in
the DIMM_DDR2_2 and
DIMM_DDR2_4 slots)
Installing Memory Modules
1. The memory module has only one notch on the center and will only fit in the right
orientation.
2. Insert the memory module vertically into the DIMM slot. Then push it in until the
golden finger on the memory module is deeply inserted in the DIMM slot.
3. The plastic clip at each side of the DIMM slot will automatically close.
Important
You can barely see the golden finger if the memory module is properly inserted
in the DIMM slot.
Volt
Notch
7338v1.0CH2 Hardware Setup.p65 2007/6/5, 下午 02:558