User`s manual

MS-7388 Mainboard
B-2
RAID Configuration
Creating and deleting RAID set and performing other RAID setting up operations are
done in the RAID BIOS. During bootup, a screen similar to the one below will appear
for about few seconds. Press <Ctrl-F> to enter the FastBuild utility.
The Fast Build Utility menu screen will appear. The Main Menu is used to choose the
operation to be performed.
Important
Be sure to set the SATA Mode to “RAID” in BIOS (the path is : Intergrated
Peripherals => On-Chip ATA Devices => OnChip SATA Controller) be-
fore configuting the RAID BIOS.