Technical information

Polycom CMA System Release Notes
Version 5.3
21
Gatekeeper/
Global
Address
Book
SSGSE-6933 5.0 Deleting a fully registered
non-dynamically managed
endpoint from a Polycom CMA
system and re-adding it manually
(via Add command) does not
register the endpoint with the
Polycom CMA system
gatekeeper and Global Address
Book.
After adding the endpoint to the
system manually, reboot the
endpoint.
Gatekeeper/
Scheduling
SSGSE-6881 5.0 If dial rules are implemented
blocking some video endpoints
from receiving calls, scheduled
conferences will still connect
those blocked endpoints.
None
Global
Address
Book
SSGSE-8577
SSGE-1072
5.0 ISDN-only HDX endpoints with
H.323 protocol disabled do not
receive ISDN calling information
in the Global Address Book
entries sent by the CMA system.
None
Global
Address
Book
SSGSE-8491
SSGE-1090
5.0 An endpoint's Global Address
Book Display Name does not
automatically go back to its
original name when the endpoint
is associated with a room and
then unassociated.
None
Global
Address
Book
SSGSE-7701 5.0 If you delete a standard
managed device (any device that
is not being dynamically
managed) that is registered to
the Polycom CMA system for
gatekeeper, Global Address
Book, and management services
and then add it back (either
manually or automatically), the
Global Address Book status will
be mismatched between the
Polycom CMA system and the
endpoint.
Power cycle the endpoints.
Guest Book SSGSE-8514
SSGE-1081
5.0 A Polycom RMX 2000 system
does not display Guest Book
entries from the CMA system
Global Address Book, even when
endpoints do display them
correctly.
None
Category
Issue #
Found in
Release Description Workaround