Technical information

Polycom CMA System Release Notes
Version 5.3
28
Interop-VBP SSGSE-5063 4.1.0 The Polycom CMA system's IP
Call Detail Record for any
inbound call traversing a
Polycom VBP device shows a
'Source' System Name that is the
earliest gatekeeper registrant to
the VBP - which may not be the
System Name of the endpoint
that actually placed the call.
None
Interop-View SSGSE-7514 5.0 The QoS values for ViewStation
SP endpoints are not displayed
in the Endpoint > Monitoring
View page. These values are not
available to the Polycom CMA
system.
None
Interop-View SSGSE-6584 5.0 When a Polycom CMA system
loses connection to a Polycom
ViewStation FX endpoint, the
CMA system reports the
disconnection in the UI.
However, an email alert is not
generated for this connection
error.
None
Interop-View SSGSE-6088 5.0 The Polycom CMA system
Device List may display the
incorrect software version for
Polycom ViewStation FX
endpoints or the software version
displayed may change
inappropriately.
None
Interop-VSX SSGSE-7505 5.0 Incorrect bit rates may be
displayed for VSX and V-Series
devices in a call through a
bridge.
None
Interop-VVX SSGSE-7896 5.0 After a Polycom CMA system
restart, registered VVX phones
may re-register, but may not
receive its buddy list from the
CMA system and may appear
offline to its buddies.
None
Interop-VVX SSGSE-6479 5.0 In the Polycom CMA system
Endpoint > Monitoring View
page, the Call Information
section does not display the Call
Statistics of Polycom VVX
devices.
None
Category
Issue #
Found in
Release Description Workaround