Technical information

Polycom CMA System Release Notes
Version 5.3
31
Polycom
Scheduling
Plugin for
Microsoft
Outlook
SSGSE-5202 4.1.0 The Polycom Scheduling Plugin
for Microsoft Outlook is available
in the Download list even if there
is no license for the plugin.
However, the plugin will not
connect to the the Polycom CMA
system without a license and
cannot be used.
None
Provisioning SSGSE-8962
SSGE-1143
5.0 Using scheduled provisioning to
change the Display H323
Extension field on the Home
Screen of an HDX endpoint
provisions the Extension field on
the Place a Call page instead.
None
Provisioning SSGSE-7886
SSGSE-7766
4.1.5 If a user has multiple devices of
the same type (for example,
more than one Polycom CMA
Desktop client or more than one
Polycom HDX system) registered
with the Polycom CMA system in
dynamic management mode, the
second device to register may
get provisioned with a System
Name other than the name set
up in the provisioning profile.
None
Provisioning SSGSE-7874 5.0 The Polycom CMA system
provisions Username and
Domain Username for Polycom
HDX endpoints when Provision
Domain Username option is not
enabled on the CMA system.
None
Provisioning SSGSE-5106 4.0.0 Provisioning Polycom HDX 6000
and 4000 systems fail if the
provisioning profile includes the
Home Screen options of "ISDN
Only" or "Both".
Create a separate provisioning
profile for Polycom HDX 6000
and 4000 systems with the
applicable Home Screen options
of IP only or None.
Recovery
DVD
SSGSE-4578 4.1.0 When using the Polycom CMA
system recovery DVD, if the
imaging process fails, an error
message will only display for a
short amount of time, and then
disappear. This may cause
confusion if the process failed
and nobody was physically there
to see it, since the end result will
look the same in a success or
failure scenario.
To ensure success, watch the
imaging process until it reaches
the end. If the imaging fails, an
error will be displayed only
temporarily.
Category
Issue #
Found in
Release Description Workaround