User manual

88 Series Outboard / 8801 Issue 7.6
EQ Section
EQ Button
The EQ button activates the EQ section.
When illuminated, the EQ is in circuit, when the led is off the EQ is bypassed.
EQ To Sidechain
The EQ To Sidechain button places the EQ in the sidechain.
Placing the EQ in the sidechain removes it from the channel path and vice
versa.
Low Frequency Band
The LF Gain knob sets the cut or boost for the low frequency band with a
range of +/-20dB.
Pressing the LF Gain knob switches the Low Frequency band between
Peaking and Shelving modes.
A led lights to indicate when Shelving is selected.
• The LF Hz knob sets the low frequency between 33Hz and 440Hz.
• When the LF band is set to Peak, pressing the LF Hz knob switches the
band between Low (0.7) and High Q (2.0).
A led lights to indicate the selection of High Q.
• When the LF band is set to Shelving mode, selecting High Q has no
effect.
The High Q led is therefore deactivated and remains unlit.
Low Mid Frequency Band
• The Lo Mid Gain knob sets the cut or boost for the low medium
frequency band with a range of +/-20dB.
• The LMF Hz knob sets the low medium frequency between 120Hz and
2kHz.
• The Lo Mid Q knob adjusts the continuously variable Q between 0.4 and
10.
High Mid Frequency Band
• The Hi Mid Gain knob sets the cut or boost for the high medium
frequency band with a range of +/-20dB.
• The HMF Hz knob sets the high medium frequency between 800Hz and
9kHz.
• The Hi Mid Q knob adjusts the continuously variable Q between 0.4 and
10.
High Frequency Band
• The HF Gain knob sets the cut or boost for the high frequency band with
a range of +/-20dB.
• Pressing the HF Gain knob switches the High Frequency band between
Peaking and Shelving modes.
A led lights to indicate when Shelving is selected.
• The HF Hz knob sets the high frequency between 1.5kHz and 18kHz.
When the HF band is set to Peak, pressing the HF Hz knob switches the
band between Low (0.7) and High Q (2.0).
A led lights to indicate the selection of High Q.
• When the LF band is set to Shelving mode, selecting High Q has no
effect.
The High Q led is therefore deactivated and stays unlit.
- 12 -