User manual

88 Series Outboard / 8801 Issue 7.6
Digital (Genie) Input
The Digital (Genie) input is available via an optional internal daughter card.
The Genie input is only selectable when this optional card is fitted.
Phase Button
All inputs can be phase reversed using the Phase button.
The Phase button will illuminate to indicate a phase inversion between input
and output.
Filters Section
High Pass Filter
The high pass filter has a 12dB per octave (20dB per decade) slope and a
frequency range from 30Hz to 300Hz.
It is switched into circuit by pressing the High Pass frequency knob.
The associated led will light to indicate it is in circuit.
Low Pass Filter
The low pass filter has a 12dB per octave (20dB per decade) slope and a
frequency range from 1.5kHz to 18kHz.
It is switched into circuit by pressing the Low Pass frequency knob.
The associated led will light to indicate it is in circuit.
Filters to Sidechain
The Filters To Sidechain button puts both filters in the sidechain.
When the filters are in the sidechain they are not available in the channel
path and vice versa.
Dynamics Section
Full Limiter/Compressor and Gate/Expander facilities are available.
The Limiter/Compressor uses the top row of controls and the Expander/Gate
uses the bottom row of controls.
Dynamics Button
The Dynamics button activates the Dynamics section.
When illuminated, both Compressor/Limiter and Expander/Gate functions are
all in circuit.
When not illuminated both are bypassed.
• To disable the Compressor, set the Threshold to +20dBu and the
Ratio to 1.
• To disable the Gate, set the Range to 0dB.
- 8 -